Base Cameras, Columbus AFB, MS

NOTE: A New Revised SOW dated 3 September has been added, 2nd round of Q & A, 52.212-2 Revised, and date for submission extended.

NOTE: Solicitaton has been amended to add revised Statement of Work, Q and A, and extend the due date.

Unless otherwise specified, the contractor shall furnish all personnel, transportation, equipment, tools, materials, and other resources required to: Provide, install, configure, and integrate a new Video Management System (VMS) Install servers or provide cloud base storage capable of storing at least 30 days of video recordings Install three (3) workstations or provide capability for administrators to log into the system virtually Replace fourteen (14) cameras and install an additional eleven (11) cameras at designated locations, as outlined in Attachment 1 Supply and install all necessary equipment and perform required configurations to integrate up to 40 existing Axis cameras into the operating system. The specific Axis camera models to be integrated are:

Camera Model Name Minimum Firmware Supported -

Axis 211 D2110-VE 11.10.61

Axis M3027-PVE M3027 5.55.1

Axis P-1448-LE P1448-LE 11.10.61

Axis P3346 P3346 11.10.61

Axis M3007-PVE M3007-PV 5.70.1 & 6.50.5.2

Axis P3301 P3301 5.40.9.2

Axis Q6000-E Mk II Q6000-E Mk II 6.50.5.7

Axis Q60 PTZ NFI NFI

Axis Q1765-LE Q1765-LE 11.10.61

All equipment shall be connected to the Air Force Network and must comply with UFC requirements. The contractor shall become familiar with the security and network architecture of Columbus AFB to ensure an optimized and efficient system implementation. Contractor shall also provide software licensing for 1 base year and 4 option years. This requirement will be offered under NAICS Code: 561621, vendors that do not have this NAICS code referenced on SAM.gov will not be considered. This requirement will be awarded based on price and technical acceptability, where technical acceptability is defined as the vendor takes no exceptions to the Statement of Work.