6515--Bariatric Exam Tables Grand Junction VA Medical Center, CO

Active

Contract Opportunity

As of April 1st, 2025: the salient characteristic for weight capacity is hereby updated from 700 lbs to 650 lbs. Exam tables must be able to support up to 650 lbs.

Salient Characteristics:
Exam table must be ADA compliant for a small exam room. (Exam rooms are approximately 10 x 10 and usually includes an exam bed, provider desk, and clinical work area.)

Table dimensions: **+/- 2 inches from the provided dimension is acceptable**

Table length expandable from 57 to 78 approximate when flat
Table width approx.. 28
Bed/exam table base should be approximately 46 length by 32 wide
Must include seamless upholstered/cushioned exam table tops
width approximately 28
Upholstery must be seamless, non-porous, and offer a protective finish to resist bacteria growth, staining, and damage.
Preferred color of upholstery: black
Must include leg extensions can extend 18 for patient in prone position

Table adjustments:

Must be able to adjust height from approx.. 18 (minimum) to approx.. 37 (maximum) **+/- 2 inches acceptable**
Table must be able to change from low flat position to up right sitting position and back support positioning with powered control
Back support angle: 0 degrees minimum and approx.. 80 degrees maximum
Pelvic tilt: 0 degree (horizontal) to 6 degree (up) approximate
Must include foot control for powered positioning (height adjustment, back, tilt and angle adjustments)

Base unit must include at least one (1) storage drawer
Approximately 9 x 19 x 4 to store a small amount of clinical supplies
Must be heated for OB/GYN or Urology use

Weight capacity: must be able to support up to 700 lbs. 650 lbs.

Must include side safety handles (2 per table) that can lock into place to prevent left or right rotation. Should be able to rotate to the side or toward the back of the table for improved access and stability of the patient

Must include stirrups

Must be able to use with electrical outlets (plug with grounding pin)
Power requirements: 115-230 V depending on configuration

Safety features:
Cutoff sensor activates when obstruction is in the moving tracks
Safety switch on side of table to manually stop movement

Attachments/Links