Automotive Rotary Lift, etc.

Agency:	State Government of Louisiana
State:	Louisiana
Type of Government:	State & Local
Posted Date:	Nov 11, 2025
Due Date:	Nov 25, 2025
Solicitation No:	40006-R0030375
Original Source:	Please Login to View Page
Contact information:	Please Login to View Page
Bid Documents:	Please Login to View Page

Attachment Preview

Delgado Community College

Purchasing Department

501 City Park Avenue, Bldg. 37

New Orleans, Louisiana 70119

(504) 762-3027

Invitation to Bid

Bid Name:

40006-R0030375 – Automotive Rotary Lift, etc.

Bid Due By & To Be Opened On:

Tuesday, November 25, 2025 at 1:00PM CST

Contact Person:

Wendy Boesch

Senior Buyer

(504) 762-3031

________________________________________________________________

NAME OF COMPANY

________________________________________________________________

ADDRESS

____________________________ / ____________ / _____________________

CITY, STATE, ZIP

_________________ / _______________ / _____________________________

PHONE NUMBER FAX NUMBER

________________________________________________________________

SIGNATURE OF COMPANY REPRESENTATIVE

________________________________________________________________

NAME (PRINTED) & TITLE OF COMPANY REPRESENTATIVE

*TITLE PAGE*

GENERAL INFORMATION

1. Any questions regarding this Invitation to Bid shall be in writing and shall be addressed to Wendy

Boesch, Senior Buyer-Purchasing Department at the following address:

Delgado Community College

O’Keefe Administration Building

501 City Park Avenue, Building 37

New Orleans, La 70119

**Questions ONLY may be emailed to: wboesc@dcc.edu or purchasingdept@dcc.edu

Any additional information resulting from such inquiries shall be distributed to all bidders via

addenda. The College will not be responsible for any other explanation of the documents.

2. Sealed bids may be submitted by mail or in person. (All bids must be IDENTIFIABLE PRIOR

to any envelope/package opening). The BID NAME and NUMBER must be on the OUTSIDE of

the packaging, including any express mail/shipping packaging.

Emailed or faxed bids NOT accepted.

Mailed bids and hand carried bids shall be sealed and delivered to the person/address in item #1. If

hand carried, Bids are to be delivered directly to the Purchasing Department. Do not leave on

counter unattended. Please note that express mail or USPS carriers may not deliver directly to 501

City Park Avenue. The Bidder /proposer is solely responsible for ensuring that its courier service

provider makes inside deliveries to 501 City Park Avenue.

**Bids received without this information, Not identifiable, and/or after the due date and time on the

title page shall be automatically disqualified. **

3. Each Bidder is solely responsible for the accuracy and completeness of its bid. Errors or omissions

may be grounds for rejection, or may be interpreted in favor of the College.

4. Each Bidder is solely responsible for the timely delivery of its bid. Delgado Community College will not

be responsible for any delays in the delivery of bids, whether delayed in the mail, or for any reason

whatsoever.

5. Only the issue of a purchase order or a signed acceptance of a proposal constitutes acceptance on

the part of the College.

6. Assuming there is no prompt payment discount provision, payment will be made within 30 days from

receipt of products in satisfactory condition, or within 30 days from receipt of invoice, whichever is

later.

7. Proposer or Bidder, contractor, etc. certifies, by signing and submitting a proposal for

$25,000 or more, that their company, any subcontractors, or principals are not suspended or debarred

by the General Services Administration (GSA) in accordance with the requirements in OMB Circular

A‐133. (A list of parties who have been suspended or debarred can be viewed via the internet at

www.epls.gov .)

*END OF GENERAL INFORMATION SECTION*

SCOPE and SPECIFICATIONS

40006-R0030375 – Automotive Rotary Lift, etc.

SCOPE and SPECIFICATIONS:

This open solicitation is for the provision, delivery and installation of New Automotive Rotary Lift etc. as listed

below or an approved equivalent. The successful bidder shall furnish all supplies to: Delgado Community

College, City Park Campus Warehouse located at 894 Navarre Avenue, New Orleans, LA 70124.

The Bidder agrees that by submitting a bid and acceptance of an award, all rates, requirements, terms and

conditions as stated in this bid document will become a contractual agreement between the College &the Bidder.

SPECIFICATIONS: (or approved equivalent)

1). Rotary SP012 Wide Automotive Symmetric 2-Post Lift 12,000 lbs Capacity & Installation – (Quantity 1)

Vehicle lifts for EVs often require higher weight capacities because electric vehicles, especially heavy-duty trucks

and SUVs, are significantly heavier than their traditional gasoline counterparts due to the large battery packs they

contain. This increased vehicle weight directly translates to greater stress on lifting equipment, necessitating

higher capacity lifts with reinforced structures to ensure safe and stable operation during maintenance

procedures. The wider stance makes it easier to service wide trucks and battery electric vehicles.

MUST include the following features:

 Two post symmetric automotive lift

 Red color

 12,000 lbs lift capacity

 Minimum rise height of 75”

 Minimum overall width of 12” 10”

 Minimum overall height of unit 13’

 Maximum overall height of unit 14”

 Minimum drive-thru width of 119”

 Minimum bay size 14’ x 26’

 Front and rear 3-stage arms

 Front and rear arms minimum retracted length 27-1/2”

 Front and rear arms maximum extended length 59”

 Screw-up frame cradles with a minimum height of 4-3/4”

 Quantity of four, 3-1/2” stack adapters

 Quantity of four, 5” stack adapters

 Quantity of four screw up EV pads

 2 HP motor, 208-230V

 Maximum time of full rise 60 seconds

 Must be ALI (Automotive Lift Institute) certified

 Installed with all necessary hardware for installation, less final electrical connection

2). Rotary R3AC60 Air Conditioning Recharging Station – (Quantity 2 each)

The charging station is a fully automatic air conditioning (A/C) recharging machine for automotive workshops,

used to service vehicle air conditioning systems that utilize the R1234yf refrigerant gas. It automatically performs

the tasks of recovering, recycling, and recharging refrigerant, along with performing leak detection and system

evacuation. It features a 10-inch industrial touchscreen with an intuitive interface for programming cycles, a built-

in gas identifier for purity checks, and can connect to a smartphone app for remote monitoring.

MUST include the following features:

• R1234yf refrigerant compatible

• Fully automatic functions

• Automatic leak detection

• Refrigerant quantity measurement

• Electronic scale

• Minimum 10-inch color touchscreen display

• Built-in Wi-Fi for updates and report printing

• High and Low side analog gauges

• Two stage, 40 cfm vacuum pump

• Refrigerant identifier

• 20lb minimum onboard storage tank capacity

• Charging accuracy of at least +/- 15g

• At least 97% efficiency of refrigerant recovery

• Built-in vehicle database

• Capable of custom programing

• Flat-free wheels for easy movement

• Built-in TeamViewer for remote technical support and training

• Ability to connect to smartphone app for remote monitoring

3). Rotary LT35A Lift Table – (Quantity 1)

The lift table is a 3,500-pound capacity, air-hydraulic lifting table designed for handling heavy vehicle components,

particularly electric vehicle (EV) batteries, engines, and transmissions. It operates using a shop's compressed air

supply and a hydraulic system, so no electrical power is needed to lift or lower loads.

MUST include the following features:

• Lifting capacity of at least 3,500lbs

• Minimum rise height of 69”

• Maximum collapsed height of 30”

• Overall width of at least 35”

• Overall length of at least 100”

• Minimum deck width of 31”

• Split-sliding top that extends to provide a minimum of an extra 8 inches of surface area

• Maximum closed deck length of 75”

• Minimum open deck length of 80”

• Minimum of 10 locking positions

• Air-powered hydraulics

• 90-120 psi air operating pressure

• Minimum length of 75” pendant cord to allow for ample operator movement

• Side-to-side and fore-and-aft tilt adjustments. Must be able to be done with a load on the table

• equipped with at least 8-inch, lockable, 360-degree, low-friction casters

• includes air-released mechanical safety locks that automatically engage in at least nine different positions

• PASE and UL201 compliant for shop equipment

• Must be fully compatible and able to be used in conjunction with next item on bid list (Repair Table)

This page summarizes the opportunity, including an overview and a preview of the attached documents.

Bid Number	Description	Date Issued	Bid Open Date/Time
40006-R0030375	Automotive Rotary Lift, etc. Original: 40006-R0030375	11/11/2025	11/25/2025 1:00:00 PM CT

Department	+- Comm/Tech College - Delgado Community College
Section	Purchasing Department
Dept Code	40006
Contact	Tracey Sheffield
Address	501 City Park Avenue, Bldg 37 New Orleans, LA 70119
Phone	5047623027
Fax	5047623089
Email	svarbl@dcc.edu

Automotive Rotary Lift, etc.

Attachment Preview

Sign-up for a Free Trial, Government Bid Alerts

See Also