Addendum #1 - McAuliffe School Bid #25-08, McAuliffe School Roofing Improvement Project

Agency:	Oxnard School District
State:	California
Type of Government:	State & Local
NAICS Category:	236220 - Commercial and Institutional Building Construction 238160 - Roofing Contractors
Posted Date:	May 27, 2026
Due Date:	Jun 2, 2026
Original Source:	Please Login to View Page
Contact information:	Please Login to View Page
Bid Documents:	Please Login to View Page

Wednesday, May 27, 2026

ADDENDUM #1 – MCAULIFFE SCHOOL

OXNARD SCHOOL DISTRICT

BID #25–08, McAuliffe SCHOOL ROOFING IMPROVEMENT PROJECT 2026

NOTICE TO ALL CONTRACTORS SUBMITTING BIDS FOR THIS WORK:

You are hereby notified of the following changes, clarifications or modifications to the original Contract

Documents, Project Manual, Drawings, Specifications, and subsequent Addenda. This Addendum shall

supersede the original; Contract Documents, and previous Addenda wherein it contradicts the same and shall

take precedence over anything to the contrary therein. All other conditions remain unchanged.

CHANGES AND/OR CLARIFICATIONS TO THE PROJECT MANUAL, CONTRACT DOCUMENTS, DRAWINGS AND

SPECIFICATIONS:

CLARIFICATION/CHANGES/ADDITIONS TO THE PROJECT MANUAL:

1. 1. Include in base bid a $40,000 allowance for damaged wood replacement at McAuliffe School.

QUESTIONS AND ANSWERS:

1. Page 10 of 17 Per 2.8 “Roof Insulation and Insulation Accessories” B. Roof Insulation c. is calling No insulation

size and 1/4” densdeck but on page 12 of 15 the spec’s is calling for 1” see D.2 can you please confirm will it be

2.5” or 1”?

A: Per the specification the total thickness of Polyiso insulation is 1”. Coverboard is 1/4”.

2. Per 075416 page 10 of 15 2.9 Walkway Materials, we need a walkpad layout or liner feet so we all could bid

apples to apples? See page 14 of 15 3.8 Walkway Installation calling to install walkpad at all rooftop units and

roof hatch with a walkway path from roof hatch to all roof tops (HVAC units) provide walk pad layout?

A: 1. Per liner foot. Include in base bid 660LF of specified walkway roll installed.

2. Yes, that is correct.

3. At walls where there is wall panels there is no counterflashing do we install a skirt metal? With new insulation

the Base flashing at wall is going to be around 4" will that be acceptable?

A: Yes, skirt metal is required where missing. Yes 4-6” base flashings have been approved.

4. At existing duct supports has L brackets can you provide a detail, so we all bid apples to apples?

A: See 3.7 Item C: Remove the newly installed HVAC Uni-Strut supports and flashings. Replace with approved

round or square tube supports or use a roofed-in sleeper detail in these areas.

END OF ADDENDUM #1

This page summarizes the opportunity, including an overview and a preview of the attached documents.

Sign-up for a Free Trial, Government Bid Alerts