34--Siemens Metallurgy Milling Station

Agency: Department of Veterans Affairs
State: Pennsylvania
Type of Government: Federal
FSC Category:
  • 34 - Metalworking Machinery
NAICS Category:
  • 333517 - Machine Tool Manufacturing
Posted Date: Sep 11, 2019
Due Date: Sep 17, 2019
Solicitation No: 36C24E19Q0183
Bid Source: Please Login to View Page
Contact information: Please Login to View Page
Bid Documents: Please Login to View Page
Opportunity History
  • Original Synopsis
    Sep 10, 2019
    5:21 pm
Solicitation Number :
36C24E19Q0183
Notice Type :
Sources Sought
Synopsis :
Added: Sep 10, 2019 5:21 pm
DESCRIPTION: This is a sources sought to determine the availability of potential sources having the skills and capabilities necessary to perform/provide the SPECIFIED REQUIREMENT. All interested vendors are invited to provide information to contribute to this market survey/sources sought synopsis only. Questions should be submitted by email to millicent.covert@va.gov. Provide only the requested information below. The purpose of this synopsis is to gain knowledge of potential qualified sources and their size classification (Service Disabled/Veteran Owned Small Business (SDVOSB/VOSB), Hub-zone, 8(a), small, small disadvantage, woman-owned small business, or large business) relative to NAICS 333517 Machine Tool Manufacturing. Responses to this synopsis will be used by the Government to make appropriate acquisition decisions. After review of the responses to this sources sought synopsis, a solicitation announcement may be published on the FBO website. Responses to this sources sought synopsis are not considered adequate responses to any future solicitation announcements. All interested offerors will have to respond to the solicitation announcement in addition to responding to this sources sought announcement.

VHA Regional Procurement Office (RPO) - East is seeking sources that can supply components for a Metal Milling Station for the VA Salt Lake Health Care System to manufacture and refine stainless steel and titanium implants. Interested parties must be able to provide all components of the Siemens equipment requested. The following parts and support are required:

ITEM INFORMATION

ITEM NUMBER

DESCRIPTION OF SUPPLIES/SERVICES

QUANTITY

UNIT

0001

Milling System to include:

TN-MX200 TALON, SIEMENS 808D W/ 900MM TABLE,6000 RPM SERVO SPINDLE

ADVANCED 808D SIEMENS 808D ADVANCED CONTROL

ROTARY TABLE WITH SIEMENS SERVO DRIVE

1.00

EA



Responses must be emailed to millicent.covert@va.gov no later than12 Noon EST, Tuesday, September 17, 2019. Please reference 36C24E19Q0183 in the subject line of your email when responding to this notice. Your response should include both the STATEMENT OF CAPABILITY and BUSINESS SIZE AND SOCIO-ECONOMIC STATUS information as explained below. This notice is to assist the Service Area Office East with determining sources only. If a solicitation is issued it will be announced at a later date, and all interested parties must respond to that solicitation announcement separately from the responses to this announcement.

REQUESTED INFORMATION: (1) STATEMENT OF CAPABILITY: Submit a brief description [ten (10) pages or less] that includes product specifications. Include past experience with performing this type of service for the VA, other Government (Federal or State) agencies, or for a private medical facility. Please indicate your address (2) BUSINESS SIZE AND SOCIO-ECONOMIC STATUS: (a) Indicate whether your business is large or small (b) If small, indicate if your firm qualifies as a small, emerging business, or small disadvantaged business (c) If disadvantaged, specify under which disadvantaged group and if your firm is certified under Section 8(a) of the Small Business Act (d) Indicate if your firm is a certified Hub-zone firm (e) Indicate if your firm is a woman-owned or operated business (f) Indicate if your firm is a certified Service-Disabled Veteran Owned Small Business (SDVOSB) or Veteran Owned Small Business (VOSB)(g) Include the DUNS number of your firm. (h) State whether your firm is registered with SAM System for Award Management https://www.sam.gov/portal/public/SAM/#1 and/or the VetBiz Registry at http://vip.vetbiz.gov/. If not, please NOTE: any future solicitation could only be awarded to a contractor who is registered in SAM and to receive award based on SDVOSB or VOSB status you must be registered in the VetBiz Registry.

Contracting Office Address:

Department of Veterans Affairs

VHA Regional Procurement Office (RPO) - East

323 North Shore Dr. Ste. 500

Pittsburgh, PA 15212

Point of Contact:

Ms. Millicent Covert

millicent.covert@va.gov

Place of Performance:

VA Salt Lake Health Care System

500 Foothill Blvd

Salt Lake City, UT 84148
Please consult the list of document viewers if you cannot open a file.
Attachment
Type:
Other (Draft RFPs/RFIs, Responses to Questions, etc..)
Label:
Attachment
Posted Date:
September 10, 2019
https://www.vendorportal.ecms.va.gov/FBODocumentServ...
https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=5148468&FileName=36C24E19Q0183-000.docx
Description: 36C24E19Q0183 36C24E19Q0183_1.docx
Contracting Office Address :
US Department of Veterans Affairs;Veterans Health Administration;Regional Procurement Office (RPO) East;323 North Shore Drive, Suite 500;Pittsburgh PA 15212-5319
Point of Contact(s) :
Ms. Millicent Covert
millicent.covert@va.gov

Millicent.Covert@va.gov
All Files
Attachment
Sep 10, 2019
36C24E19Q0183 36C24E...
36C24E19Q0183 36C24E19Q0183_1.docx
General Information
Notice Type:
Sources Sought
Posted Date:
September 10, 2019
Response Date:
September 17, 2019
Archiving Policy:
Automatic, on specified date
Archive Date:
November 16, 2019
Original Set Aside:
N/A
Set Aside:
N/A
Classification Code:
34 -- Metalworking machinery
NAICS Code:
333 -- Machinery Manufacturing/333517 -- Machine Tool Manufacturing

Sign-up for a Free Trial, Government Bid Alerts

With Free Trial, you can:

You will have a full access to bids, website, and receive daily bid report via email and web.

Try One Week FREE Now

See Also

Opportunity History Original Synopsis Aug 19, 2019 7:01 am Solicitation Number : N0010419QFE23

Department of the Navy

Bid Due: 10/21/2019

Opportunity History Original Synopsis Oct 02, 2019 7:59 am Solicitation Number : Waterjetmachine

Department of the Army

Bid Due: 11/04/2019

19-00194-AKNJ Welding Cut-In Trucks SEPTA will accept bids with the eProcurement system only

Southeastern Pennsylvania Transportation Authority

Bid Due: 10/26/2019

Opportunity History Original Synopsis Oct 09, 2019 7:00 am Solicitation Number : N0010419QEM42

Department of the Navy

Bid Due: 11/12/2019