878-20P Vet Tech Fencing

Agency: Colorado Mountain College
State: Colorado
Type of Government: State & Local
Posted Date: Feb 25, 2020
Due Date: Mar 4, 2020
Solicitation No: 878-20P
Bid Source: Please Login to View Page
Contact information: Please Login to View Page
Bid Documents: Please Login to View Page

878-20P Vet Tech Fencing

Issue Date: 02/05/2020 • Due Date: 03/04/2020

878-20P Addendum 001 (0.1 MiB)

878-20P Bid Sheet (31 KiB)

878-20P Sign In Sheet (49 KiB)

878-20P Vet Tech Fencing (0.5 MiB)

Awarded:

Attachment Preview

#878-20P
Veterinary Technology Fencing
Spring Valley Campus
Buyer:
CMC Purchasing Department
802 Grand Avenue / Glenwood Springs, CO 81601 / bids@coloradomtn.edu
#878-20P Veterinary Technology Fencing
Section I: Introduction
Colorado Mountain College (“CMC”) is a statutory local college district established in 1965. The district
and service area cover 12,000 square miles in all or part of nine counties. CMC offers 77 certificates,
54 associate degrees and 5 bachelor’s degrees.
The long-standing investment from our communities allows us to keep our quality high, our tuition
affordable and our access wide open. Eleven world-class mountain locations in central Colorado enable
big-school opportunities in small, personal settings. Our unusually strong local partnerships create rich
experiences for real-world learning and careers. The result? Proven student success that makes
Colorado Mountain College a choice that’s uniquely smart. For additional information about CMC,
please go to www.coloradomtn.edu.
CMC reserves the right to make multiple awards resulting from this RFP or to award no contract at all.
CMC uses the Rocky Mountain E-Purchasing System (“BidNet”) to post solicitations and any supporting
or additional information, including Addenda, Bid Sheet, and awards. Proposals must be submitted
prior to close on BidNet. CMC cannot accept a response that did not come through the right channel
on time. Visit http://www.bidnetdirect.com/colorado for help with customer service or other questions.
Please make sure to leave time for unexpected technical or other trouble. You are encouraged to
submit a day early. Sometimes submittals take longer to load than expected; if you run out of time
before you are finished with your entire upload CMC will not be presented with the response.
The only exception to the use of BidNet is that all questions from potential bidders must be submitted
to bids@coloradomtn.edu. Those questions will then be responded to by addendum posted to BidNet.
Please do not directly contact any member of CMC’s staff or faculty, or any member of the Selection
Committee other than the Buyer listed in this document regarding this proposal. Any attempt to do so
will result in your firm’s disqualification at the discretion of the Director of Purchasing and Contracts.
SCOPE OF PROJECT
Colorado Mountain College’s Spring Valley Campus located at 3000 Cty. Rd. 114, Glenwood Springs,
CO is requesting quotes from qualified firms and/or individuals to rebuild fencing at the Veterinary
Technology facility.
SPECIFICATIONS
Existing Fence shall be removed by contractor (metal recycle dumpster will be
available on site)
Install in line 14’ gates. Gates provided by owner # TBD.
Install new fence per attached drawings
o Material specs for fence
36 inch woven wire 6x6 “field fence”
All wooden post shall be pressure treated and a minimum of 5
inches in diameter and 6 ft tall. Wooden post shall be a minimum of
2 feet in the ground and 4 feet above ground. Wooden post shall be
used as described in drawings.
2
#878-20P Veterinary Technology Fencing
3 strands of barbed wire shall go on top of field fence as shown in
drawing.
All T post shall be a minimum of 6 feet tall, with 2 feet in the ground
and 4 feet above ground.
16 feet between post
Wooden post placed after every 3 T post.
Wire stays shall be place evenly between wooden and T posts (at 8
feet).
All wire shall be secured to post with appropriate fasteners.
These are the minimum specs. Please advise if exceeding minimum. Contractor
must use Price Sheet included in bid packet.
TIMELINE
Work to begin as weather permits and be completed by June 15, 2020.
PROPOSAL CONTENT
The information provided herein is intended to assist Bidders with a proper response to this RFP. CMC
believes that this RFP provides interested Bidders with sufficient information to submit proposals that
meet minimum requirements. However, the RFP is not intended to limit a proposal’s content or to
exclude any relevant or essential data. Bidders are encouraged to include additional information that
will substantiate their service capabilities, product quality, and commitment to support your product or
service. Any exceptions or alternate offerings to this request must be communicated. CMC reserves
the sole right to determine what is considered to be “equivalent” or “equal”. CMC also reserves the right
to request samples for testing and evaluation.
Additionally, CMC recognizes you as the expert in this industry and we appreciate ideas that may
improve the design or implementation of our project. Please submit your bid to the specifications
provided and include information or ideas you may have that CMC should consider to improve our
project. Our selection committee will carefully review these ideas and we will contact you with questions.
3
#878-20P Veterinary Technology Fencing
Section II: Timeline
a.
JOB WALKTHROUGH. There will be a mandatory walkthrough. See timeline below. Please
note: The walkthrough will gather at the front of the lobby of the Calaway Academic Building at the
Spring Valley Campus and depart promptly as scheduled. Any contractor not present when the initial
group leaves may not join the walkthrough.
B.
TIMELINE MODIFICATION. CMC reserves the right to modify this timeline at any time. Any
changes will be posted to the CMC Purchasing Department’s website as soon as the information is
available. All times are Mountain.
Issue date
TIMELINE
Mandatory Pre-Proposal Walkthrough
Questions and Clarifications Due (send to
bids@coloradomtn.edu)
Questions Answered
Request for Proposals (RFP) Due
http://www.bidnetdirect.com/colorado
Short List of Vendors Announced
Candidate Interview (if necessary – save the date)
Target Award Date (Subject to Change)
Section III: Instructions to Bidders
DATE
FEBRUARY 4,
2020
FEBRUARY 12,
2020
FEBRUARY 19,
2020
FEBRUARY 26,
2020
MARCH 4, 2020
N/A
N/A
MARCH 11,
2020
TIME
4:00 p.m.
10:00 a.m.
2:00 p.m.
4:00 p.m.
2:00 p.m.
4:00 p.m.
TBD
4:00 p.m.
a. Walkthroughs that are mandatory must have your firm name on the official sign-in sheet
distributed at the walkthrough to be eligible to bid. This process is expected to be competitive with
numerous vendors participating. CMC endeavors to provide a uniform distribution of information to
vendors and conduct a fair selection process. We ask that you please follow these instructions carefully.
Any submittal that does not meet the requirements set forth in this document and any addenda will not
be considered by the Selection Committee.
b. Please upload your submittal to BidNet in one single PDF file (this may require you to convert
files and then combine them into the one PDF file) , including the following in this order:
1) Name, title, and contact information of the official representative submitting your
proposal.
2) Legal company name, address, phone, and email.
3) RFP number and name as it appears on this document.
4) Number of years in business and brief description of your company’s experience and
qualifications. Please include resumes of professionals that you expect to have primary
responsibility if you win this award if possible.
5) Your bid to include all labor, materials, supplies and equipment and proposed schedule.
4
#878-20P Veterinary Technology Fencing
6) Other information or supporting documentation that you think our selection committee
would benefit from reviewing in the decision process. Please submit as little as possible
but as much as necessary.
7) Minimum of three references with contact information for recent work that is similar in
nature.
8) Insurance certificate (For evidence of sample coverage only. Final compliant certificate
to be collected from successful bidder.).
c. Visit the Purchasing Department’s website at www.coloradomtn.edu/purchasing for additional
information on doing business with CMC.
d. Bidders should carefully read the information contained herein, and in any addenda, and submit
a complete proposal to all requirements and questions as directed.
e. Questions regarding this RFP should be submitted via email to bids@coloradomtn.edu. CMC
will attempt to answer all relevant questions submitted to this email address prior to the question
deadline in the timeline above. All such addenda issued by CMC prior to the time that proposals are
received shall be considered part of the RFP. It shall be the Bidder’s responsibility to view all documents
posted at BidNet. Inquiries seeking information that is already available from BidNet. Only those
inquiries that CMC replies to which are made by formal written addenda shall be binding. Oral and
other types of interpretations or clarifications will be without legal effect.
f.
Once you’ve uploaded your response to BidNet per the instructions in this document the RFP
will be governed by the established timeline. CMC staff cannot see who or how many responses have
been submitted to BidNet prior to the closing date so we are unable to confirm receipt. However, you
may assume your upload was successful if BidNet accepts the document.
g. Along with your RFP submit a certificate of liability insurance per the attached requirements for
evidence only. If your proposal is successful and a contract awarded, a compliant certificate of insurance
will be required with all endorsements at that time.
h. CMC makes no guarantee that an award will be made as a result of this RFP, and reserves the
right to accept or reject any or all proposals, waive any formalities or technical inconsistencies, or delete
any item/requirements from this RFP or resulting contract when deemed to be in CMC’s best interest.
i.
Representations made within the proposal will be binding on Bidder. Failure to comply with the
requirements contained in this RFP will result in the rejection of your proposal.
j.
Bidder recognizes and understands that any costs incurred by the Bidder from submitting a
response to this RFP are the responsibility of the bidder.
5

Sign-up for a Free Trial, Government Bid Alerts

With Free Trial, you can:

You will have a full access to bids, website, and receive daily bid report via email and web.

Try One Week FREE Now

See Also

CATTLE GUARDS Active Contract Opportunity Notice ID 140L4220Q0039 Related Notice Department/Ind. Agency INTERIOR,

INTERIOR, DEPARTMENT OF THE

Bid Due: 7/17/2020

* NH 0504-908 (22481) ~ Project is located in Region 2 in Pueblo

State Government of Colorado

Bid Due: 7/09/2020

Invitation for Bid (IFB) No. 220DR001 issued July 06, 2020, is seeking bids

Regional Transportation District - Denver

Bid Due: 8/18/2020

Bid Number: RFP-SSP-2020-05 Bid Title: Solar Powered Bus Shelter Lighting Category: 2020 Bids

Steamboat Springs

Bid Due: 7/28/2020