James E. Quarles WTP Valve & Actuator Replacement

The Project includes, but is not limited to, the following major elements:
•Removal of electric actuators currently installed on the valves of Filters 1-3, Filters 7-8 effluent rate of flow (ROF) valves (FIL07-MV-8, FIL08-MV-8), and the backwash rate of flow (ROF) valves (BW-MV-1, BW-MV-3) at Quarles Plant 2 for shipment by the Contractor to the valve manufacturer to mount to new valves. The Contractor shall install the EIM electric actuator removed from Filter 4’s effluent ROF (FIL04-MV-8) on Filter 8’s effluent ROF to help with maintenance of plant operations. Filter 7 will remain offline. A total of thirty-four (34) electric actuators shall be removed, consisting of thirty (32) electric filter valve actuators and two (2) backwash ROF electric actuators. The valve manufacturer shall ship the valve and actuator assemblies from the Manufacturer’s facility to the Project site.
•Installation of a total of one hundred and twelve (112) valve and actuator assemblies, consisting of one hundred and ten (110) filter valve and actuator assemblies and two (2) backwash ROF valve and actuator assemblies at Quarles Plant 2. This includes the valve and actuator assemblies noted above and shall include removal of the remaining pneumatic actuators, all air piping and appurtenances as indicated in the Drawings and the Contract Documents.
•Installation of five (5) actuators on the raw water pumps control valves in the two pump buildings (Raw Water Pump Station No. 1, Raw Water Pump Station No. 2) located at the Quarles Raw Water Pump Station on the Chattahoochee River, including removal and proper disposal of the existing hydraulic oil actuators and accumulators, and all hydraulic oil, oil piping and appurtenances. This work shall also include rotating the existing Pratt ball valves on Pump No. 4 and Pump No. 5 located in Raw Water Pump Station No. 2.
**See attachment for more details**