Common Aviation Command and Control System (CAC2S)

Agency: Department of the Navy
State: Federal
Type of Government: Federal
FSC Category:
  • 25 - Vehicular Equipment Components
NAICS Category:
  • 332322 - Sheet Metal Work Manufacturing
Posted Date: Oct 10, 2017
Due Date:
Solicitation No: M67854-16-R-0217
Bid Source: Please Login to View Page
Contact information: Please Login to View Page
Bid Documents: Please Login to View Page
Solicitation Number :
M67854-16-R-0217
Notice Type :
Award
Contract Award Date :
August 24, 2017
Contract Award Number :
M67854-17-C-0261
Contract Award Dollar Amount :
$104,850,491
Contractor Awarded Name :
General Dynamics Mission Systems
Contractor Awarded DUNS :
787800114
Contractor Awarded Address :
8201 E. McDowell Road
Scottsdale, Arizona 85257-3812
United States
Synopsis :
Added: Sep 15, 2016 2:22 pm

Program Executive Officer, Land Systems Marine Corps (PEO-LS) Air Command and Control Sensor Netting (AC2SN) has a requirement to procure, manufacture, assemble and test Full Deployment Units (FDUs) of the Common Aviation Command and Control System (CAC2S) Air Command and Control Subsystem (AC2S). This is a build-to-print requirement that includes the associated production management, software sustainment, systems engineering, testing, and logistics requirements. The contractor selected shall build these items in accordance with the provided Technical Data Package (TDP) for the required quantity of AC2S AN/TSQ-297V(1), AN/TSQ-297V(2) and AN/TSQ-297V(3) System Configurations. The contractor selected shall deliver FDUs consisting of manufactured items, Government Furnished Equipment (GFE) and Commercial Off-the-Shelf (COTS) items. The FDUs to be delivered shall be tested in accordance with Government approved test plans. Manufacturing acceptance and Government System Final Acceptance Testing (FAT) shall take place at the selected contractor's facility.



The selected contractor shall deliver initial spares in accordance with the procedures specified in the resulting contract. The contract shall include a requirement for FAT in the event a non-incumbent contractor is selected for award. The contract type is Firm Fixed Price (FFP) for FAT, FDUs, CDRLs and initial spares requirements and cost CLINs reserved for system engineering and Government Furnished Property (GFP) repair. The total quantity of FDUs anticipated between base years and options is forty-one (41). The sequence of FDU configuration manufacture is provided within the solicitation. If all options are exercised, the total contract period of performance is anticipated to be 36-48 months.



This pre-solicitation notice is for information and planning purposes only and does not contain the final Request for Proposal (RFP). The Government intends to release a final RFP in the near future, leading to full and open competition under the authority of 10 USC 2304(a) and in accordance with Federal Acquisition Regulation (FAR) Part 15. Draft AC2S RFPs were previously issued under draft RFP # M67854-16-R-0202 on 25 March 2016, 25 April 2016, and 16 May 2016 on this website. Upon posting of the final RFP to this website, proposals are anticipated to be due within 45 calendar days. All responsible sources may submit a proposal which will be considered by the agency. Contract award is expected in FY2017.


All communications regarding this notice must come through the Contracting Officer, Mr. Mohamed Elmi, at (703) 432-3233 or Mohamed.elmi@usmc.mil and the Contract Specialist, Mr. Alexander Lyon, at (703) 432-4369 or alexander.Lyon@usmc.mil

Added: Oct 07, 2016 2:33 pm


The Common Aviation Command and Control System (CAC2S) Full Rate Production and Software Sustainment solicitation is hereby issued. Draft CAC2S Request for Proposals (RFPs) were previously issued under draft RFP # M67854-16-R-0202 on 25 March 2016, 25 April 2016, and 16 May 2016 on this website. A pre-solicitation notice was issued under RFP # M67854-16-R-0217 on 15 September 2016.



Program Executive Officer, Land Systems Marine Corps (PEO-LS) Air Command and Control Sensor Netting (AC2SN) has a requirement to procure, manufacture, assemble and test Full Deployment Units (FDUs) of the CAC2S Air Command and Control Subsystem (AC2S). This is a build-to-print requirement that includes the associated production management, software sustainment, systems engineering, testing, and logistics requirements. The contractor selected shall build these items in accordance with the provided Technical Data Package (TDP) for the required quantity of AC2S AN/TSQ-297V(1), AN/TSQ-297V(2) and AN/TSQ-297V(3) System Configurations. The contractor selected shall deliver FDUs consisting of manufactured items, Government Furnished Equipment (GFE) and Commercial Off-the-Shelf (COTS) items. The FDUs to be delivered shall be tested in accordance with Government approved test plans. Manufacturing acceptance and Government System Final Acceptance Testing (FAT) shall take place at the selected contractor's facility.



The selected contractor shall deliver initial spares in accordance with the procedures specified in the resulting contract. The contract type is Firm Fixed Price (FFP) for first article testing, FDUs, CDRLs and initial spares requirements and cost CLINs reserved for system engineering and Government Furnished Property (GFP) repair. The total quantity of FDUs anticipated between base years and options is forty-one (41). The sequence of FDU configuration manufacture is provided within this solicitation.



With the exception of the documents posted to this website, unclassified solicitation documents are available upon request to Department of Defense (DoD) and U.S. DoD Contractors only. Interested qualified sources shall submit a written request to access the documents to mohamed.elmi@usmc.mil , alexander.lyon@usmc.mil , and anna.shuty@usmc.mil . Offerors must be registered in the System for Award Management (SAM) Database prior to submission of a capability statement package in order to receive consideration. This may be accomplished electronically at http://www.sam.gov/vendor.cfm .



This program includes technical information that is only releasable to current and approved DoD contractors. The program requires a procurement effort in certain critical technologies or data that are not releasable to foreign firms. Some documents are under Federal export control for sensitive or controlled technologies regulated by the U.S. Department of State International Traffic in Arms Regulations (ITAR) protecting national security. Data may not be exported without an approval, authorization, or license under Executive Order 12470 or the Arms Export Control Act. Disclosure of the control drawings requires the verification of a current license for the oral, visual or documentary disclosure of technical data by U.S. persons to foreign persons as defined under the U.S. Department website: http://pmdtc.org/licenses.htm .



Upon review of your written request with the information provided below, verification of your status, and acknowledgement of the contractor's responsibility under the U.S. Export laws and regulations, access to the requested documents will be provided.



- Company name


- Mailing address


- Email address


- Point of contact


- Phone number


- Current CAGE code


- Verification of registration in SAM



Approved contractors will receive access the technical documents via CD ROM and AMRDEC SAFE. To obtain attachments and exhibits referenced in this solicitation, Prime contractors must contact the AC2SN contracting division POCs listed below:



Contracting Officer :


Mohamed Elmi; 703-432-3233 or Mohamed.elmi@usmc.mil



Contract Specialists :


Alex Lyon; 703-432-4369 or alexander.lyon@usmc.mil


Anna Shuty; 703-432-4366 or anna.shuty@usmc.mil



PLEASE BE AWARE : Prime contractors shall be responsible for disseminating solicitation attachments and exhibits to prospective/proposed subcontractors. Subcontractors shall not contact the CAC2S contracting division, rather they should defer to the responsible Prime contractor to obtain this information instead.



All attachments provided by ARMDEC SAFE shall be destroyed by 28 April 2017. All attachments provided by CD ROM shall be returned not later than 28 April 2017 by mailing the same as follows:



For FEDEX and UPS, etc.:


Commander


Marine Corps Systems Command


Material Management


2201A Willis Street


Quantico, VA 22134-6050


Attn: Mr. Mohamed Elmi, PEO LS CAC2S


(703) 432-3233



For US Postal Service:


Commander


Marine Corps Systems Command


2200 Lester Street


Quantico, VA 22134-6050


Attn: Mr. Mohamed Elmi, PEO LS CAC2S


(703) 432-3233



Offerors are encouraged to initiate information access requests early, as the proposal due date will not be extended to accommodate offerors who have not completed this process. Proposals are due no later than the date and time specified in Section A, Block 9 to the address identified in Section L. All hand carried proposals shall be coordinated in advance in accordance with Section L of the solicitation.



Unclassified comments or questions regarding this solicitation shall be submitted in writing via e-mail to the AC2SN contracting division POCs listed above utilizing the Request for Proposal (RFP) Question/Answer Matrix included in Section L. Answers to questions and adjudicated comments may be posted to https://www.fbo.gov/ . Any subsequent procurement notifications will be posted on the Federal Business Opportunities (FBO) website at https://www.fbo.gov/ . All interested offerors are encouraged to register on the FBO website to receive email notifications when information related to this acquisition is updated, or documents related to this acquisition are issued and available for download. The Government requests that all interested parties ensure that they are listed on the "Interested Vendors List" in FBO. As a rule, the Government will not send notifications directly to interested offerors, and it is recommended that the interested offerors periodically check this website for updates.



Please be advised that all previous discussion and exchanges of information are superseded by this formal solicitation. Offerors are encouraged to examine the solicitation closely.



All communications regarding this solicitation shall be submitted in writing via e-mail to the AC2SN contracting division POCs listed above. This process of communication is imperative in order to maintain the integrity of the solicitation and source selection process. Again, it is recommended that interested offerors check this website frequently for any updates.




Added: Oct 25, 2016 3:50 pm

-------------------------------------------------------------------------------------------------

The first round of answered questions for the RFP is hereby posted.

Added: Nov 04, 2016 11:20 am

---------------------------------------------------------------------------

The second round of answered quesitons for the RFP and RFP Amendment 0001 are hereby posted.
Added: Nov 16, 2016 3:28 pm
-------------------------------------------------------------------------------------------

The third round of answered questions for the RFP and RFP Amendment 0002 are hereby posted.

Added: Nov 22, 2016 2:21 pm
---------------------------------------------------------------------------
RFP Amendment 0003 is hereby posted.
Please consult the list of document viewers if you cannot open a file.
Solicitation 1
Type:
Solicitation
Posted Date:
October 7, 2016
Description: M67854-16-R-0217 Section L Attachment L-1
Description: M67854-16-R-0217 Section L Attachment L-2
Description: M67854-16-R-0217 Section L Attachment L-3
Solicitation 1
Type:
Solicitation
Posted Date:
October 7, 2016
Description: M67854-16-R-0217 Request for Proposals (RFP)
Description: M67854-16-R-0217 Exhibit A CDRLs
Description: M67854-16-R-0217 Exhibit B CDRLs
Description: M67854-16-R-0217 Exhibit E CDRLs
Attachment_(12)_-_DD254,_Contract_Security_Classific... (456.21 Kb)
Download/View Attachment_(12)_-_DD254,_Contract_Security_Classification_Specification,_23_September_2016.pdf
Description: Attachment 12 DD 254
Q&As Round 1
Type:
Other (Draft RFPs/RFIs, Responses to Questions, etc..)
Label:
Q&As Round 1
Posted Date:
October 25, 2016
Description: Q&As Round 1
Amendment 1
Type:
Mod/Amendment
Posted Date:
November 4, 2016
Description: M67854-16-R-0217-0001
M67854-16-R-0217-Conformed_through_Amendment_0001.do... (290.03 Kb)
Download/View M67854-16-R-0217-Conformed_through_Amendment_0001.docx
Description: M67854-16-R-0217-0001 (Conformed)
M67854-16-R-0217_Exhibit_A_Amendment_0001_v3_CLEAN.d... (755.20 Kb)
Download/View M67854-16-R-0217_Exhibit_A_Amendment_0001_v3_CLEAN.docx
Description: M67854-16-R-0217-0001 Exhibit A
M67854-16-R-0217_Exhibit_B_Amendment_0001_v3_CLEAN.d... (395.78 Kb)
Download/View M67854-16-R-0217_Exhibit_B_Amendment_0001_v3_CLEAN.docx
Description: M67854-16-R-0217-0001 Exhibit B
M67854-16-R-0217_Exhibit_E_Amendment_0001_v2_CLEAN.d... (125.67 Kb)
Download/View M67854-16-R-0217_Exhibit_E_Amendment_0001_v2_CLEAN.docx
Description: M67854-16-R-0217-0001 Exhibit E
Q&As Round 2
Type:
Other (Draft RFPs/RFIs, Responses to Questions, etc..)
Label:
Q&As Round 2
Posted Date:
November 4, 2016
Description: CAC2S RFP QAs Round 2
Amendment 2
Type:
Mod/Amendment
Posted Date:
November 16, 2016
Description: M67854-16-R-0217-0002
M67854-16-R-0217-Conformed_Though_Amendment_0002.doc... (303.89 Kb)
Download/View M67854-16-R-0217-Conformed_Though_Amendment_0002.docx
Description: M67854-16-R-0217 Conformed Through Amendment 0002
Description: M67854-16-R-0217 Exhibit A027
Q&As Round 3
Type:
Other (Draft RFPs/RFIs, Responses to Questions, etc..)
Label:
Q&As Round 3
Posted Date:
November 16, 2016
Description: CAC2S RFP QAs Round 3
Solicitation 3
Type:
Solicitation
Posted Date:
November 16, 2016
Description: L-1 Cost Template 15 Nov 2016
Amendment 3
Type:
Mod/Amendment
Posted Date:
November 22, 2016
Description: M67854-16-R-0217-0003
Description: M67854-16-R-0217-0003_Conformed
Solicitation 4
Type:
Solicitation
Posted Date:
November 22, 2016
Description: L-1 Cost Template_21 November 2016
Contracting Office Address :
2200 Lester Street

Quantico, Virginia 22134
United States
Place of Performance :
At Contractor Facility
United States

United States
Primary Point of Contact. :
Alexander E. Lyon,
Contract Specialist
Phone: (703) 432-4369
Secondary Point of Contact :
Mohamed Elmi,
Contracting Officer
Phone: (703) 432-3233

Sign-up for a Free Trial, Government Bid Alerts

With Free Trial, you can:

You will have a full access to bids, website, and receive daily bid report via email and web.

Try One Week FREE Now

See Also

6525--INTENT TO SOLE SOURCE Upgrade OS Philips EPIQ7 Ultrasound Scanners VISN23 Active Contract

VETERANS AFFAIRS, DEPARTMENT OF

6525--36C255-20-AP-1910 589-20-3-5052-0010_XR240_NAC (VA-20-00057847) Active Contract Opportunity Notice ID 36C25520Q0397 Related Notice Department/Ind. Agency

VETERANS AFFAIRS, DEPARTMENT OF

Persistent Cyber Training Environment (PCTE) Cyber Innovation Challenge #4 (CIC #4) Active Contract

DEPT OF DEFENSE

Data Center Operations and System Support Active Contract Opportunity Notice ID JA-2020-01-0448 Related

HOMELAND SECURITY, DEPARTMENT OF