CGC VALIANT DRYDOCK FY18

Agency: Department of Homeland Security
State: Federal
Type of Government: Federal
Caegory:
  • J - Maintenance, Repair, and Rebuilding of Equipment
Posted Date: Oct 11, 2017
Due Date: Aug 25, 2017
Solicitation No: HSCG8018QP45019
Bid Source: Please Login to View Page
Contact information: Please Login to View Page
Bid Documents: Please Login to View Page
Solicitation Number :
HSCG8018QP45019
Notice Type :
Sources Sought
Synopsis :
Added: Aug 10, 2017 8:44 am

SOURCES SOUGHT NOTICE
USCGC VALIANT (WMEC- 621)
DRYDOCK REPAIRS FY18



This is a SOURCES SOUGHT NOTICE / REQUEST FOR INFORMATION; not a pre-solicitation notice or solicitation for proposals/quotations. Pursuant to FAR Part 10 (Market Research), the purpose of this notice is to: (1) determine if sources capable of satisfying the agency's requirements exists, (2) determine if commercial items suitable to meet the agency's needs are available or could be modified to meet the agency's requirements, and (3) determine the commercial practices of companies engaged in providing the needed service or supply. Pursuant to FAR Part 6 and FAR Part 19, competition and set-aside decisions may be based on the results of this market research. This notice in no way obligates the Government to any further action.


REQUIREMENT: This notice is issued by the U.S. Coast Guard, Surface Forces Logistics Center, Norfolk, VA to identify sources capable of providing the following:


DRYDOCK REPAIRS SPECIFICATION: (Subject to change at the discretion of the Government). Contractor shall provide all necessary facilities, materials, equipment, and personnel to perform DRYDOCK repairs to the U.S. Coast Guard Cutter (USCGC) VALIANT (WMEC-621), a 210 Foot Medium Endurance Cutter. The vessel is home ported in Mayport, FL. All work will be performed at the contractor's facility. There is no geographical restriction for this cutter.


SCOPE OF WORK: The scope of the acquisition is for the DRYDOCK repairs of the USCGC VALIANT (WMEC-621). This work will include, but is not limited to the following Work Items:


WORK ITEM 1: Hull Plating (U/W Body), Ultrasonic Testing
WORK ITEM 2: Appendages (U/W), Leak Test
WORK ITEM 3: Propulsion Shaft Fairwaters and Rope Guards, Inspect
WORK ITEM 4: Appendages (U/W) - Internal, Preserve
WORK ITEM 5: Voids (Non-Accessible), Leak Test
WORK ITEM 6: Voids (Non-Accessible), Internal Surfaces, Preserve
WORK ITEM 7: Propulsion Shafting, Strain Gage Alignment, Inspect
WORK ITEM 8: Propulsion Shafting; Remove, Inspect, and Reinstall (Optional Based on GFE)
WORK ITEM 9: Propulsion Shaft, Renew
WORK ITEM 10: Propulsion Intermediate/Line Shafts, Inspect
WORK ITEM 11: Propulsion Shaft Coating, Renew (Optional Based on GFE)
WORK ITEM 12: Propulsion Shafting, Straighten (Optional Based on GFE)
WORK ITEM 13: Propulsion Shaft Seal (Mechanical And Inflatable) Assemblies, Inspect
And Repair Or Renew
WORK ITEM 14: Propulsion Shafting, Optical Or Laser Alignment Check
WORK ITEM 15: Propulsion Shaft Bearings (External), Renew
WORK ITEM 16: Propulsion Stern Tube Bearings, Renew
WORK ITEM 17: Controllable Pitch Propeller (CPP) Oil Distribution (OD) Box, Inspect and Service
WORK ITEM 18: Controllable Pitch Propeller Hub Assembly, Renew
WORK ITEM 19: Fathometer Transducer, Renew
WORK ITEM 20: Underwater (Speed) Log Transducer(s), Renew
WORK ITEM 21: Sea Valves and Waster Pieces, Overhaul or Renew
WORK ITEM 22: Sea Strainers (All Sizes), Renew
WORK ITEM 23: Sea Strainers - Duplex (All Sizes), Overhaul
WORK ITEM 24: Rudder Assembly; Remove, Inspect And Reinstall
WORK ITEM 25: Rudder(s), Preserve ("100%")
WORK ITEM 26: Rudder Stock Bearings Clearances, Check
WORK ITEM 27: Grey Water Holding Tank(s), Clean and Inspect
WORK ITEM 28: Sewage Holding Tank(s), Clean and Inspect
WORK ITEM 29: Tanks (Grey Water Holding), Preserve "100%"
WORK ITEM 30: Tanks (Sewage Holding), Preserve "Partial"
WORK ITEM 31: U/W Body, Preserve (100%)
WORK ITEM 32: Stern Tube Interior Surfaces, Preserve 100% (Optional Based on
Condition)
WORK ITEM 33: Hull Plating Freeboard, Preserve - Partial
WORK ITEM 34: Superstructure, Preserve "Partial"
WORK ITEM 35: Cathodic Protection / Zinc Anodes, Renew
WORK ITEM 36: Drydock
WORK ITEM 37: Temporary Services, Provide - Cutter
WORK ITEM 38: Bulkhead Plating, Renew (CSMP 20150006)
WORK ITEM 39: Rudder Assembly; Remove, Inspect and Reinstall (CSMP 20160024)
WORK ITEM 40: Aft Aux Machinery Stringer, Renew (CSMP 20170005)
WORK ITEM 41: Potable Water Piping and Hull Plating, Renew (CSMP 20170008)
WORK ITEM 42: Aft Steering Stringer, Renew (CSMP 20170009)
WORK ITEM 43: Engine Room Bilge, Preserve (CSMP 20170010)
WORK ITEM 44: Fixed Ballast (Lead Ingots), Reinstall (TCTO TN6000)
WORK ITEM 46: NVIS Antenna Coupler Foundation, Renew (CSMP 20170018)

All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures.


ANTICIPATED PERIOD OF PERFORMANCE: The period of performance is anticipated to be for seventy (70) calendar days with a start date of 10 Jan 2018 and end date of 21 Mar 2018. (Subject to change at the discretion of the Government)


ANTICIPATED NAICS CODE/SIZE STANDARD: The applicable NAICS Code is 336611, Ship Building and Repairing and the size standard is 1,250 employees.


SUBMISSION OF INFORMATION: Companies having capabilities necessary to meet or exceed the stated requirements are invited to provide information to contribute to this market survey/sources sought notice including commercial market information and company information. Companies may respond to this Sources Sought Notice via
e-mail to Mable Lee at mable.l.lee@uscg.mil or via fax to (757) 628-4562 (Attn: Mable Lee/C&P1-MEC) no later than 2:00 PM on 25 Aug 2017, Eastern Standard Time (EST) with the following information/documentation:


1. Name of Company, Address and DUNS Number.


2. Point of Contact and Phone Number.


3. Business Size applicable to the NAICS Code: 8(a) Small Business Concern; b. HubZone Small Business Concern; c. Service-Disabled Veteran Owned Small Business Concern (SDVOSBC); d. Veteran Owned Small Business Concern (VOSBC); e. ED Woman Owned Small Business Concern (EDWOSB); f. Woman Owned Small Business Concern (WOSBC); g. Small Business Concern; h. Large Business Concern


4. Documentation Verifying Small Business Certification:


a. If claiming 8(a) status, provide a copy of your 8(a) Certificate from SBA.


b. If claiming HuBZone status, provide a copy of your HuBZone Certificate from SBA.


c. If claiming SDVOSBC status, provide documentation that shows the Service Disabled Veteran (SDV) unconditionally owns 51 % of the business, controls the management and daily operations, and holds the highest officer position in the company. Documentation should also be provided to show that the SDV has a service-connected disability that has been determined by the Department of Defense or Department of Veteran Affairs. Finally, provide documentation that shows the business is small under the NAICS code 336611.


d. If claiming VOSBC status, provide documentation that shows the Veteran unconditionally owns 51% of the business, controls the management and daily operation, make long-term decisions for the business, and holds the highest officer position in the company that works at the business fulltime during normal working hours. The documentation should also show the business is small under the NAICS code 336611.


e. If claiming EDWOSB status, provide documentation that shows the company is
at least 51% owned by one or more women who are "economically disadvantaged", and primarily managed by an economically disadvantaged woman that make long-term decisions for the business, hold the highest officer position in the business and work at the business full-time during normal working hours. The documentation should also show the business is small under the NAICS code 336611. A woman is presumed economically disadvantaged if she has a personal net worth of less than $750,000 (with some exclusions), her adjusted gross yearly income averaged over the three years preceding the certification less than $350,000, and the fair market value of all her assets is less than $6 million


f. If claiming Woman Owned Small Business status, provide documentation that shows the company is at least 51% owned and controlled by one or more women, and primarily managed by one or more women that make long-term decisions for the business and hold the highest officer position in the business and work at the business full time during normal working hours. The women must be U.S. citizens. The documentation should also show the business is small under the NAICS code 336611.


g. If claiming Small Business status, provide documentation to show the business is small under NAICS code 336611.


5. Statement of Proposal Submission: Statement on how your company will do the work and that your company WILL submit a proposal as a prime contractor if a solicitation is issued as a result of this Sources Sought Notice.


6. Past Performance Information: Evidence of experience in work similar in type and scope to include contract numbers, project titles, and dollar amounts, points of contact and telephone numbers. If two companies are planning to conduct business and submit an offer as a Joint Venture or similar type of teaming agreement, they are requested to provide past performance information on projects of similar scope that they have performed together as a Joint Venture, if available. Providing individual past performance documentation from each company on separate projects where the two did not work together may be considered less relevant.


SAM: Interested parties should register in the System for Award Management (SAM), formerly known as Central Contractor Registration (CCR), as prescribed in FAR Clause 52.232-33. SAM can be obtained by accessing the internet at www.sam.gov or by calling
1-866-606-8220.


Disclaimer and Important Notes: This Sources Sought Notice is for market research purposes only and does not constitute a Request for Proposal/Quotation; and, it is not considered to be a commitment by the Government to award a contract nor will the Government pay for any information provided; no basis for claim against the Government shall arise as a result from a response to this Sources Sought Notice or Government use of any information provided. Failure to respond or submit information in sufficient detail may result in a company not being considered a likely offeror when making a decision on whether or how to set aside a solicitation for restricted competition. Regardless of the information obtained from this Sources Sought Notice, the Government reserves the right to consider any arrangement as deemed appropriated for this requirement. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. No proprietary, classified, confidential, or sensitive information should be included in your response to this Sources Sought Notice. The Government reserves the right to use any information provided by respondents for any purpose deemed necessary and legally appropriate, including using technical information provided by respondents in any resultant solicitation. At this time no solicitation exists; therefore, Do Not Request a Copy of the Solicitation. After a review of the responses received, a pre-solicitation notice and solicitation may be published on Federal Business Opportunities (FEDBIZOPPS) website. It is the potential offeror's responsibility to monitor FEDBIZOPPS for release of any future solicitation that may result from this Sources Sought Notice. However, responses to this Sources Sought Notice will not be considered adequate responses to any resultant solicitation.

Please consult the list of document viewers if you cannot open a file.
Amendment 1
Type:
Mod/Amendment
Posted Date:
October 11, 2017
Description: Amendment A00001
Contracting Office Address :
300 East Main Street
Suite 600
Norfolk, Virginia 23510-9102
United States
Place of Performance :
Awarded Contractor's Facility

United States
Primary Point of Contact. :
Mable L. Lee,
Contract Specialist
Phone: 757-628-4820
Fax: 757-628-4562
Secondary Point of Contact :
Kaity Ramirez-Chavarria,
Contract Specialist
Phone: 757-628-4640
Fax: 757-628-4562

Related Document

Aug 11, 2017[Sources Sought] CGC VALIANT DRYDOCK FY18

Sign-up for a Free Trial, Government Bid Alerts

With Free Trial, you can:

You will have a full access to bids, website, and receive daily bid report via email and web.

Try One Week FREE Now

See Also

Opportunity History Complete View Original Synopsis Combined Synopsis/Solicitation Aug 15, 2018 11:54 am

Department of the Air Force

Bid Due: 9/14/2018

Opportunity History Original Synopsis Aug 16, 2018 7:29 am Solicitation Number : FA5613-18-R-0017

Department of the Air Force

Bid Due: 9/17/2018

Opportunity History Complete View Original Synopsis Combined Synopsis/Solicitation Aug 17, 2018 2:58 am

Department of the Navy

Bid Due: 9/17/2018

Opportunity History Original Synopsis Jul 27, 2018 12:26 pm Solicitation Number : FA8118-18-R-0045

Department of the Air Force

Bid Due: 8/27/2018