Added: Aug 15, 2008 1:47 pm
0001 Trailer Mounted Mobile Air Compressor with the following specifications:
1. High pressure compressor operating at 25 cubic feet per minute (CFM)
2. 6,000 PSIG, maximum working pressure
3. Integrated air purification system
4. Four (4) ASME air storage cyclinders on board storage system
5. Two position NFPA compliant containment type, fill station
6. Carbon monoxide monitor calibration kit including 20 ppm and Zero Gases
7. Integrated 12 cylinder, SCBA storage rack
8. Emergency stop switch
9. Automatic condensate drain complete with combination separator/muffler
10. Two prime movers (electric or diesel) with independent on/off switches
11. Onboard electrical generating system capable of producing 7500 watts
12. Telescoping light mast with four (4) 500-watt quartz lights and integral air intake system
13. Onboard four (4) 115-volt electrical receptacles
14. Highway rated trailer
USED OR REFURBISHED EQUIPMENT IS UNACCEPTABLE
Any and all shutdowns and abnormal functions of the compressor or purification system shall be immediately indicated by fault lamps and audible alarm as required by NFPA 1901.
The fill station shall be built and tested to conform to NFPA 1901, 1999 Edition.
Must meet CGA pamphlet G-7, Compressed Air for Human Respiration, the requirements of ANSI/CGA g-7.1, Commodity Specification for Air, Grade E, and all other recognized standards for respirable air.
This is a Request for Information (RFI) ONLY. It is not a Request for Proposal (or solicitation) or an indication a contractual commitment will exist for this requirement. Firms responding to this RFI are asked to provide the following information in their initial response: company's full name, GSA contract #, business size, address, point of contact, and a clear indication as to whether or not they can provide the item or service the government is seeking. Final responses to this RFI will be due by 1600 PM EST 20 Aug 2008. Responses will be reviewed and may result in further clarifications to further explore commercial capabilities with selected respondents. As industry may expect to see portions of submitted information in future solicitations, portions of the response containing proprietary information should be clearly marked as such. Information submitted will not be returned to the respective respondents. The POC for this synopsis is 1Lt Julie A. Corchado, Contracting Officer, Email: julie.corchado@us.af.mil; Fax (813) 828-1091. Please use this contact information for any questions.
