|
Opportunity History
|
Solicitation Number:
HSCG40-08-R-50008
Notice Type:
Solicitation
Synopsis:
Added: October 18, 2007
The US Coast Guard seeks to purchase up to six (6) API 2C Certified Marine Crane systems to install on two 400? Polar Icebreakers. The existing marine cranes will be replaced by three new marine cranes, one forward and two on the aft of each vessel.The forward crane shall be capable of: (a) transferring a maximum of 6,000 pounds (lbs.) of cargo from ship to shore at a maximum reach of 60 feet, and (b) servicing a cargo hatch at a radius of 18 feet. The crane shall have a telescopic, extending, or knuckle boom configuration.
The aft cranes shall be capable of: (a) transferring a maximum of 30,000 lbs. of cargo from ship to shore at a maximum reach of 70 feet; (b) launching and retrieving from the water a Landing Craft Vehicle Personnel (LCVP) that is 36 foot in length, 11 foot beam, and weighs 26,000 lbs. fully loaded from a radius of 25 feet; (c) launching and retrieving from the water an Arctic Survey Boat (ASB) that is 39 foot in length, 12 foot beam, and weighs 25,000 lbs. fully loaded from a radius of 27 feet; (d) servicing a flight deck hatch at a radius of 45 feet; and (e) servicing a storage container that is located on the starboard side of the vessel at a radius of 64 feet. The crane shall have a knuckle boom configuration which limits load pendulation by keeping the boom tip as close as possible to the load during lifting and slewing operations (level luffing).
All cranes shall be located in the same position as the current cranes.
In general, the contractor shall be responsible for supplying all related hardware and machinery including the crane, control station pedestal, electric control panel, HPU, interface requirements for installation, logistics information and materials, and warranty, technical and training services. This is a systems purchase only and does not include installation of the crane system on the vessels. In addition to the marine crane, the Coast Guard will be requesting other deliverables such as drawings, manuals and reports. The solicitation will be posted on FedBizOpps on or about January 2008. It is the contractor?s responsibility to check FedBizOpps on a regular basis for the solicitations and any amendments issued. Contractor shall be registered in the Central Contractors Registration (CCR). See number note 1.
Solicitation 1
Sensitive/Secure Package:
no
Posted Date:
May 12, 2008
Description: Solicitation Package
Description: Attachments to solicitation
Description: Past Performance Doc.
Amendment 1
Sensitive/Secure Package:
no
Posted Date:
June 10, 2008
Description: Amendment No. 0001.
Amendment 2
Sensitive/Secure Package:
no
Posted Date:
June 19, 2008
Description: Amendment No. 0002 - Solicitation closing/receipt of proposals is hereby extended until 8 July 2008 @2:00 P.M.
Contracting Office Address:
Department of Homeland Security, United States Coast Guard (USCG), Commanding Officer, USCG Engineering Logistics Center, 2401 Hawkins Point Road Building 31, Mail Stop 26, Baltimore, MD, 21226-5000, UNITED STATES
Primary Point of Contact.:
Nancy D Dean,
Contracting Officer
Phone: 410-762-6461 Fax: 410-762-6056
Secondary Point of Contact:
Sharon J. Jackson,
Contract Specialist
Phone: 410-762-6463 Fax: 410-762-6056
|
General Information
Notice Type:
Solicitation
Original Posted Date:
October 18, 2007
Posted Date:
June 19, 2008
Response Date:
January 31, 2008
Original Response Date:
January 31, 2008
Archiving Policy:
Automatic, on specified date
Original Archive Date:
December 30, 2008
Archive Date:
December 30, 2008
Original Set Aside:
Total Small Business
Set Aside:
Total Small Business
Classification Code:
39 -- Materials handling equipment
NAICS Code:
333 -- Machinery Manufacturing/333923 -- Overhead Traveling Crane, Hoist, and Monorail System Manufacturing
|
