Added: Apr 30, 2008 5:33 pm
Modified: May 27, 2008 10:33 am
Track Changes
This announcement will be used as a market research tool. The government is in the position to research commercially available Bore Scopes for possible future acquisitions.
The purpose of this modification is to add to the general description of the required item. The boresight telescope would be used to perform the critical function of boresight alignment of the Common Remotely Operated Weapon Station (CROWS) II weapons system during fire control system calibration procedures. The CROWS II weapons system consist of the M249 (5.56mm) Machine Gun, M240 (7.62mm) Machine Gun, Browning M2 (0.50 cal) Machine Gun or the MK19 (40mm) Automatic Grenade Launcher. The field of view should be 4 degrees minimum. The resolution should be 10 seconds of arc or better. The eyepiece focus should be over the range of +/- 4 diopters. The reticle should have a clearly defined aiming index and should be visible at night without the use of generated or stored electricity in the device itself, with no other marks on the lens. The reticle should not contain tritium and should be visible with the use of an external light source such as a flashlight. The telescope should be nitrogen purged. The telescope should withstand temperatures at a range of -40 F at 0% humidity to 160 F at 95% humidity. The telescope should also withstand a submersion of 1 meter for 1 hour. The boresight telescope should be a small lightweight telescope with a maximum weight of 0.9 lb (0.408 kg). It should be able to repeatedly collimate the weapons system with accuracy and have a user adjustable self-collimation capability without tools. It should have a magnification in the range of 5X to 14X. It should also be able to adapt to existing government mandrels, drawing 12960718, which available from the POC listed below.
The purpose of this notice is to identify and establish initial interest and points of contact from the private industry. This information may be used to design acquisition strategy to include socioeconomic program support. It may also help to identify and establish commercial practices to the government.
All responses to this notice should include the following: Company Name, Point of Contact, Address, Telephone and Fax Numbers, E-mail address, Brief Description of Company/Capabilities, Experience Areas, History, DUNS Number, CAGE Code, as well as Size Category (Large/Small Disadvantaged, ect.) Also, provide any supporting information such as commercial literature, catalogues, manuals, ect.
The requested date from receipt of responses to this announcement is extended to NLT 09 Jun 08. Upon receipt and analysis of information, potential vendors may be contacted for possible appointments for further research and exploration.
No solicitation will be issued at this time. Participation in this effort is strictly voluntary with no cost or obligation to be incurred by the U.S. Government. The U.S. Government will in no way be bound to this information if any solicitation is issued.
Notice to Contractors: All contractors who proved goods or services to the Department of Defense (DOD) must be registered in the Central Contractors Register (CCR). To register in CCR via the internet, go to http://CCR.EDI.DIS.MIL, or contact the CCR registration assistance center at 888-227-2423.
If you have any questions, comments, or concerns, please contact Sam Rockhold by phone at 309-782-4316 or E-mail at Samuel.rockhold@us.army.mil. All information must be provided in writing or published from and submitted to TACOM LCMC (RI), ATTN: Sam Rockhold/AMSTA-LC-GLK-A, Rock Island, IL 61299.
