| 59--Garmin GPSMAP 60CSx expanable color hand hled GPS receiver with accessories. Part number 010-00422-22, 100 each. One year manufactur... |
| Program Summary |
 |
| Title: |
59--Garmin GPSMAP 60CSx expanable color hand hled GPS receiver with accessories. Part number 010-00422-22, 100 each. One year manufacturer warranty. |
| GovCB Opps ID : |
ADP12040736350001750 |
| Document Type: |
Combine Solicitation |
| FSC Code: |
59 - Electrical and Electronic Equipment Components
|
| Set Aside: |
Total Small Business |
| Solicitation No.: |
W15P7T-08-Q-D016 |
| Source: |
http://www2.fbo.gov/spg/USA/USAMC/DAAB07/W15P7T%2D08%2DQ%2DD016/Combine%20Synopsis%5FSol... |
Place of
Performance: |
Address: US Army C-E LCMC Acquisition Center - DAAB07 ATTN: AMSEL-AC, Building 1208 Fort Monmouth NJ Postal Code: 07703-5008 Country: US
|
Posted Date:
|
Feb 26, 2008 |
| Last Update: |
Mar 17, 2008 |
| Due Date: |
Mar 04, 2008 |
|
| Description |
|
General Information
| Document Type: |
Combine Solicitation |
| Solicitation Number: |
W15P7T-08-Q-D016 |
| Posted Date: |
Feb 26, 2008 |
| Original Response Date: |
Mar 04, 2008 |
| Current Response Date: |
Mar 04, 2008 |
| Original Archive Date: |
May 03, 2008 |
| Current Archive Date: |
May 03, 2008 |
| Classification Code: |
59 -- Electrical and electronic equipment components |
| Set Aside: |
Total Small Business |
| Naics Code: |
334220 -- Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing |
Contracting Office Address
US Army C-E LCMC Acquisition Center - DAAB07, ATTN: AMSEL-AC, Building 1208, Fort Monmouth, NJ 07703-5008
Description
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Requirement is for Garmin GPSMAP 60CSx expandable color hand hled GPS receiver with accessories. One year manufacture warranty. Quantity 100 each. Delivery is 30 days after contract award date. Commerical packaginf is required. Inspection, Acceptance and FOB are Origin. Requirement is for FMS Case CO-B-VDN. Requirements are in accordance Attachment 001 Statement of Work, dated January 7, 2008. Attachement 001 January 7, 2008
St atement of Work
1.0 Scope. This Statement of Work (SOW) defines the efforts required to produce the products required by this solicitation in accordance with the Documents listed below. The items being purchased are entitled FMS Buys CO-B-VDN .
2.0 Applicable Documents. The following documents are applicable to the extent cited.
2.1 Military and Federal Stds
Document No. Document Title Applicability
NONE
2.2 Military and Federal Specs
Documen t No. Document Title Applicability
NONE
2.3 Other DoD Documents
Document No. Document Title Applicability
NONE
2.4 Coml Documents
Document No. Document Title Applicability
NONE
3.0 Requireme nts. The contractor shall produce the items in the quantity set forth in Section B of the schedule in accordance with Documents listed above and this SOW. In the event of a conflict between the requirements of this SOW and any drawings for the item on cont ract, the requirements of this SOW shall govern.
3.1. Requirements for Packaging.
3.1.1 Packaging - All hardware items shall be packaged and marked IAW Section D of the contract.
3.2 Requirements for Item Marking (Commercial Off The Shelf Items). Part Number Marking. Each item delivered under contract, along with each assembly, sub assembly, and module, shall be legibly marked with the appropriate part number and manufacturers identification. Hardware such as screws, nuts, bolts, e tc., need not be marked. This requirement should be entirely met by the contractors standard commercial marking. However, if there is any question about marking it shall be directed to the Contracting Officer for resolution.
3.3. Requirements for Final Inspection and Test (COTS). The contractor shall comply with the following requirements:
3.3.1 Quality System. The contractor shall establish/maintain a system for the final inspection and test of all purchased items to comply with contra ct or order requirements.
3.3.2 Inspection and Testing. The contractor shall assure that all inspections and tests were performed on completed products. The contractor shall perform any additional inspections and tests (including visual/mechani cal inspections and functional tests) required to satisfy the form, fit, and function requirements of the contract or order.
3.3.3 Records. The contractor shall maintain adequate records of inspections and tests to demonstrate that the final prod uct satisfies contract requirements.
3.3.4 Measuring, Testing, and Inspection Equipment. The contractor shall provide and maintain gages (including production tooling used for inspection purposes) and other measuring and testing equipment to a ssure that finished products conform to contract requirements. These devices shall be calibrated against certified measurement standards which are traceable back to national/international standards.
3.3.5 Nonconforming Material. The contractor s hall maintain controls for material which does not satisfy contract or order requirements, including procedures for the its identification, segregation, and dis position (rework/repair, scrap, etc.).
3.3.6 Corrective Action. The contractor shall promptly act to correct nonconforming materials and conditions to satisfy contract or order requirements and prevent the recurrence of this problem.
3. 3.7 Handling, Storage, Preservation, Packaging, and Shipping. The contractor shall control the handling, storage, preservation, packaging, and shipping to protect the quality of finished products.
Please email quotes to point of contact, Robyne.Bau gh1@us.army.mil. Telephone number 732.427.1647
Point of Contact
robyne.baugh1, 732.427.1647
Email your questions to US Army C-E LCMC Acquisition Center - DAAB07 at robyne.baugh1@us.army.mil
Place of Performance
| Address: |
US Army C-E LCMC Acquisition Center - DAAB07 ATTN: AMSEL-AC, Building 1208 Fort Monmouth NJ |
| Postal Code: |
07703-5008 |
| Country: |
US |
|
|
