Added: May 19, 2008 11:25 am
Fastener installation kit (NSN 5180-01-470-6539). Kit contains pull-up studs and driving anvils used in conjunction with the hand hydraulic D-700 combination riveter-nutsetter (which permits installation of blind nuts (NAS1329/30, / MS 27130/31) in sizes 6-32 thru 3/8-16). The riveter will provide over 4,000 lbs of pulling force.
Combination Blind Riveter Tool Kit to include part numbers D-700, PT-100, D-28, PT-4000, including special pulling heads.
OR EQUAL EXCEPTED
Rivetless nutplate installation tool; hand operated tool with .8" stroke, 4,800lb pulling force, 6.56" height, 7.5" length, 1.95 lb unit weight, single push-button retract action. Cast aluminum construction and built-in pressure control valve
part number: D-700-365HL
OR EQUAL EXCEPTED
Split Power Riviter
Riviter will be 3lb operator unit weight, 11.8lb total weight, pulling force 5700lbs min @ 110 psi, .53 piston stroke, 90-110 psi air pressure, base unit 11.6" high, head unit 5.71" highin 90 degree configuration. Head swivels from actuation button 90 degrees (to a straight line configuration), swiveling hose assembly connecting head to base unit is approximately 4 feet long
Manufacturer part number: Cherry G84-LS split power riviter
OR EQUAL EXCEPTED
Huck 965 Power rig
Portable, air-powered unit for moderate production and repair applications, equipped with a carrying handle and casters for positioning. Quick disconnect couplings for hook-ups. Built in regulator for adjusting hydraulic pressures. For use with all tools prefixed "A" specifying air trigger option.
System: singe open center circuit with 8,400 psi max. 40 cu. in./ min. @ 5,000 psi.
Pump: Two independent air motors with rapid advance and swage.
Oil control: Four-way air piloted directional valve. Reservoir capacity: 1.56 qt. Power source: 90-100 psi compressed air @ 20 CFM.
Tool Specifications: Height = 13.25" Width = 8" Length = 12" Weight = dry 21 lbs., operational 29.75 lbs.
OR EQUAL EXCEPTED
