To respond to this bid electronically, you must be logged in with a Premium Registration.

Bid Number:	B1E09051	Status:	Open
Agency:	OFFICE ADMINISTRATION-OPER	Total Bid Lines:	2
Description:	DUMP/PLOW TRUCK AND BOX TRUCK CORRECTIONS: CCC	Closing Date: Closing Time:	11/19/2008 2:00pm CENTRAL

The information on this page provides a summary of the requirements for this bid. The official bid document includes the applicable requirements, detailed specifications, and Terms and Conditions.   In the event of any discrepancy, the official bid document will govern. To access the official bid document, click on this link:B1E09051 . A page will open with links to download the official bid document in Microsoft Word or PDF format.

IF RESPONDING ELECTRONICALLY THROUGH THE ON-LINE BIDDING/VENDOR REGISTRATION SYSTEM WEBSITE, IN ADDITION TO COMPLETING THE ON-LINE PRICING, THE PREMIUM REGISTERED BIDDER SHOULD COMPLETE AND SEND EACH EXHIBIT, AND ANY OTHER INFORMATION CONCERNING THE BID AS AN ATTACHMENT TO THE ELECTRONIC RESPONSE.

Line	Commodity
001	07048 - TRUCKS (ONE TON AND LESS CAPACITY)
CURRENT MODEL YEAR HEAVY DUTY ONE TON TRUCK, 4X4, DUAL REAR WHEELS WITH DUMP BODY AND SNOW PLOW IN ADDITION TO THE FOLLOWING MANDATORY REQUIRED EQUIPMENT, THE VEHICLES SHALL BE EQUIPPED WITH ALL STANDARD EQUIPMENT FOR THE MODEL SPECIFIED. MAKES/MODELS: CHEVROLET SILVERADO 3500, FORD F-350, DODGE RAM 3500, GMC SIERRA OR OTHER MAKE/MODEL EQUIVALENT MAKE AND MODEL OF VEHICLE BID:_______________________________________________ BIDDER SHOULD COMPLETE EXHIBIT A DETAILING THE VEHICLE BID. ENGINE: MINIMUM 300 HORSEPOWER, 8 CYLINDER, GASOLINE TRANSMISSION: HEAVY DUTY AUTOMATIC CAB TO AXLE: MINIMUM EIGHTY-FOUR (84) INCHES GVWR: MINIMUM OF 12,000 POUNDS CAB: REGULAR SEAT: MANUFACTURER'S STANDARD BENCH TRANSFER CASE: MANUFACTURER'S STANDARD FOR SPECIFIED TRANSMISSION AUTO LOCKING HUBS: MANUFACTURER'S STANDARD REAR AXLE: MANUFACTURER'S STANDARD LOCKING STEERING: MANUFACTURER'S STANDARD POWER BRAKES: MANUFACTURER'S STANDARD POWER TIRES: MINIMUM SEVENTEEN (17) INCH ON/OFF ROAD TIRES - DUAL REAR TIRES HEATING AND AIR CONDITIONING: SHALL HAVE MANUFACTURER'S STANDARD HEATING AND AIR CONDITIONING RADIO: MANUFACTURER'S STANDARD AM/FM MIRRORS: HIGH VISIBILITY OUTSIDE CAMPER TYPE DUMP BODY: MINIMUM TEN (10) FOOT IN LENGTH, TWO (2) YARD CAPACITY, INDUSTRIAL TYPE STEEL DUMP BODY; SHALL HAVE HYDRAULIC OR EQUIVALENT HOIST THAT HAS THE NECESSARY CAPACITIES TO LIFT THE DUMP BODY PROPOSED AT MAXIMUM LOAD SNOW PLOW: MINIMUM NINE (9) FOOT SNOW PLOW; TRUCK SHALL BE EQUIPPED WITH SNOW PLOW PREPARATION PACKAGE TO OPERATE PROPOSED SNOW PLOW MISCELLANEOUS: MINIMUM 160 AMP ALTERNATOR; BACK UP ALARM; MANUFACTURER'S STANDARD TINTED GLASS; INTERMITTENT WIPERS; TILT STEERING WHEEL; CAB SHIELD; ICC LIGHTS; MUD FLAPS; MANUFACTURER'S STANDARD FRONT BUMPER; COLOR OF DUMP BODY AND TRUCK SHALL BE THE SAME. DELIVERY: THE DESIRED DELIVERY IS SIXTY (60) CALENDAR DAYS AFTER THE RECEIPT OF A PROPERLY EXECUTED ORDER. IF BIDDER'S DELIVERY IS DIFFERENT, THE BIDDER SHOULD STATE DELIVERY IN DAYS AFTER RECEIPT OF ORDER: CALENDAR DAYS ARO.
002	07048 - TRUCKS (ONE TON AND LESS CAPACITY)
CURRENT MODEL YEAR HEAVY DUTY ONE TON BOX TRUCK, 4X2, DUAL REAR WHEELS IN ADDITION TO THE FOLLOWING MANDATORY REQUIRED EQUIPMENT, THE VEHICLES SHALL BE EQUIPPED WITH ALL STANDARD EQUIPMENT FOR THE MODEL SPECIFIED. MAKE AND MODEL OF VEHICLE BID:_______________________________________________ BIDDER SHOULD COMPLETE EXHIBIT B DETAILING THE BOX TRUCK BID. ENGINE: MINIMUM 300 HORSEPOWER, 8 CYLINDER, GASOLINE TRANSMISSION: HEAVY DUTY AUTOMATIC CAB TO AXLE: MINIMUM EIGHTY-FOUR (84) INCHES GVWR: MINIMUM OF 12,000 POUNDS CAB: REGULAR SEAT: MANUFACTURER'S STANDARD BENCH REAR AXLE: MANUFACTURER'S STANDARD LOCKING STEERING: MANUFACTURER'S STANDARD POWER BRAKES: MANUFACTURER'S STANDARD POWER TIRES: MINIMUM SEVENTEEN (17) INCH ON/OFF ROAD TIRES - DUAL REAR TIRES HEATING AND AIR CONDITIONING: SHALL HAVE MANUFACTURER'S STANDARD HEATING AND AIR CONDITIONING RADIO: MANUFACTURER'S STANDARD AM/FM MIRRORS: HIGH VISIBILITY OUTSIDE CAMPER TYPE MISCELLANEOUS: BACK UP ALARM; MANUFACTURER'S STANDARD TINTED GLASS; INTERMITTENT WIPERS; TILT STEERING WHEEL; CAB SHIELD; ICC LIGHTS; MUD FLAPS WITH STEEL ANTI-SAIL MUD FLAP BRACKETS; MANUFACTURER'S STANDARD FRONT BUMPER VAN BODY SPECIFICATIONS: INTERIOR DIMENSIONS: MINIMUM OF 92 INCHES WIDE; MINIMUM OF 14 FOOT IN LENGTH EXTERIOR WIDTH: MAXIMUM OF 96 INCHES LOAD HEIGHT: MINIMUM OF 84 INCHES BODY HEIGHT: APPROXIMATELY 94 INCHES (+/- 4 INCHES) REAR DOOR TYPE: SINGLE OVERHEAD ROLL-UP REAR DOOR; SHALL HAVE WEATHER SEAL; SHALL HAVE GRAB HANDLES ON EACH SIDE OF DOOR; SHALL HAVE HEADER AND UPRIGHTS THAT ARE A MINIMUM OF 12 GAUGE GALVANIZED STEEL; SHALL HAVE A THRESHOLD THAT IS A MINIMUM OF 10 GAUGE GALVANIZED STEEL WITH RAIN GUTTER REAR DOOR DIMENSIONS: MINIMUM OF 88 INCHES WIDE; MINIMUM OF 71 INCHES IN HEIGHT INTERIOR FLOORING: HARDWOOD TYPE 1, 1.125" THICK; FLOOR OF TRUCK SHALL MATCH STANDARD DOCK HEIGHT; FLOOR SHALL BE FLAT WITH NO WHEEL WELLS; PERIMETER RAIL SHALL BE MINIMUM OF 12 GAUGE STEEL; SHALL HAVE A MINIMUM OF 3 INCH I-BEAM CROSS MEMBERS INTERIOR WALL LINING: MINIMUM OF 3/8 INCH PLYWOOD OR FRP SIDEWALL; MINIMUM OF + INCH PLYWOOD OR FRP FRONTWALL; SHALL HAVE 12 INCH SCUFF PLATES ON FRONT AND SIDES; SHALL HAVE TWO ROWS OF E-TRACKS, 36 INCHES ON CENTER FROM FLOOR AND 60 INCHES ON CENTER FROM FLOOR, FLUSH WITH WALL SURFACE EXTERIOR SIDES: MINIMUM OF .040 PREPAINTED ALUMINUM THAT SHALL MATCH CAB; SHALL HAVE EXTRUDED ALUMINUM I-BEAM STUDS ON 16 INCH CENTERS; SHALL HAVE EXTRUDED ALUMINUM H-CHANNEL AROUND SIDEWALL PERIMETER; SHALL HAVE EXTRUDED ALUMINUM RUB RAIL; SHALL HAVE ALUMINUM FRONT CORNER CASTINGS/EXTRUDED ALUMINUM FRONT CORNER RADIUS ROOF: SHALL BE ONE PIECE WITH A MINIMUM OF .032 ALUMINUM SKIN; SHALL HAVE AT A MINIMUM GALVANIZED ANTI-SNAG ROOF BEAMS ON 16 INCH CENTERS; SHALL HAVE INTERIOR ROOF LIGHT/SWITCH IN REAR OF BODY BUMPER: MANUFACTURER'S STANDARD ICC APPROVED REAR LIFT GATE: MINIMUM 3,000 POUND CAPACITY TUCK-UNDER LIFT-GATE EXTENDING FULL WIDTH OF REAR DOOR OF VAN BODY EXTERIOR LIGHTS: SHALL HAVE I.C.C. APPROVED CLEARANCE LIGHTS WITH BRANCH GUARD; SHALL HAVE I.C.C. APPROVED RECESSED REAR CLEARANCE LIGHTS DELIVERY: THE DESIRED DELIVERY IS SIXTY (60) CALENDAR DAYS AFTER THE RECEIPT OF A PROPERLY EXECUTED ORDER. IF BIDDER'S DELIVERY IS DIFFERENT, THE BIDDER SHOULD STATE DELIVERY IN DAYS AFTER RECEIPT OF ORDER: CALENDAR DAYS ARO.

For more information, please contact TURNER, CALE at cale.turner@oa.mo.gov