Added: Oct 09, 2008 11:08 am
The United States Coast Guard is considering whether or not to set aside an acquisition for HUBZone concerns, for Service-Disabled Veteran-Owned Small Business Concerns (SDVOSB) or for Small Business. The estimated value of this procurement is between $250,000.00 and $500,000.00. The small business size standard is less than 1,000 employees. The NAICS Code is 336611. The acquisition is for DRYDOCK repairs to a USCGC PEA ISLAND (WBP-1347) 110 FOOT C CLASS PATROL BOAT. The vessel is homeported in Key West, FL.
All work will be performed at the contractor s facility. The performance period will be FORTY-TWO (42) calendar days with a start date on or about 16 March 2009 through 26 April 2009.
The scope of the acquisition is for the overhauling, cleaning and repairing of various items aboard the USCGC PEA ISLAND (WBP-1347) 110 FOOT C CLASS PATROL BOAT. This work will include, but is not limited to:
1. Routine Drydocking
2. Provide Temporary Logistics
3. Clean and Inspect Fuel Service Tanks
4. Clean and Inspect Fuel Stowage and Overflow Tanks
5. Clean and Inspect Oil and Oily Waste Tanks
6. Preserve Oil and Oily Water Tanks - 100%
7. Preserve Oil and Oily Water Tanks - Partial
8. Clean and Inspect Sewage Collection and Holding Tanks
9. Clean and Inspect Grey Water Collection and Holding Tanks
10. Preserve Sewage Collection and Holding Tanks - 100%
11. Preserve Sewage Collection and Holding Tanks - Partial
12. Preserve Grey Water Collection and Holding Tanks - 100%
13. Preserve Grey Water Collection and Holding Tanks - Partial
14. Clean Sewage Piping System
15. Clean Grey Water Piping System
16. Preserve and Disinfect Potable Water Tanks - 100%
17. Preserve Forward Peak Compartment
18. Preserve Forward Void
19. Renew Floating Deck System in Galley and Mess Deck
20. Clean and Inspect Heat Exchangers
21. Overhaul Stabilizing Fins
22. Inspect MDE Exhaust System
23. Overhaul and Renew Sea Valves
24. Overhaul and Renew Firemain Valves
25. Overhaul and Renew ASW Valves
26. Overhaul and Renew Bilge and Ballast Valves
27. Remove, Inspect, and Reinstall Propellers
28. Repair Propeller Root Erosion
29. Remove, Inspect, and Reinstall Propeller Shafts
30. Overhaul Mechanical Shaft Seal Assemblies
31. Inspect and Maintain Cathodic Protection System
32. Renew Water-Lubricated Propeller Shaft Bearings
33. Inspect Bronze Sleeves in Various Areas
34. Remove, Inspect and Reinstall Rudder Assemblies
35. Overhaul Steering Gear Components
36. Renew Speed Doppler
37. Renew Depth Indicating Transducer
38. Preserve Underwater Body 100%
39. Preserve Underwater Body - "Partial"
40. Renew Capastic Fairing
41. Renew Insulation in Various Compartments
42. Install Cofferdams in Galley
43. Complete Reverse Osmosis Watermaker EC
44. Install Main Diesel Engine Duplex Sea Strainers
45. Renew Cofferdam Bilge Pipe
46. Renew Sewage System Piping
47. Perform Hull Repairs
48. Ultrasonic Thickness Measurements
49. Renew Steel Shell Plating (5-pound)
50. Renew Steel Shell Plating (7.65-pound)
51. Renew Steel Shell Plating (10.2-pound)
52. Renew Steel Structural Plating (5-pound)
53. Renew Steel Structural Plating (7.65-pound)
54. Renew Aluminum Structural Plating
55. Renew Eroded Aluminum Welds
56. Renew Eroded Steel Welds
57. Perform Overlay Welding (Aluminum)
58. Perform Overlay Welding (Steel)
59. Welding Repairs Crack (Steel)
60. Welding Repairs Crack (Aluminum)
All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. In accordance with FAR 19.1305, if your firm is HUBZone certified or FAR 19.1404 if you firm is SDVOSB or FAR 19.501 if your firm is a Small Business and intends to submit an offer on this acquisition, please respond by e-mail to Nancy.M.Brinkman@uscg.mil or by fax (757) 628-4676. Questions may be referred to Nancy Brinkman at (757) 628-4579.
In response please include the following: (a) a positive statement of your intent to submit a bid for this solicitation as a prime contractor; (b) evidence of experience in work similar in type and scope to include contract numbers, project titles, dollar amounts, points of contact and telephone numbers; (c) past performance references with points of contact and phone numbers. At least two (2) references are requested, but more are desirable.
Your response is required by October 20, 2008. All of the above must be submitted in sufficient detail for a decision to be made on a HUBZone, Service-Disabled Veteran-owned Small Business set aside or Small Business set aside. Failure to submit all information requested may result in an unrestricted acquisition. A decision on whether this will be pursued as a HUBZone or SDVOSB small business set aside, or a Small Business set aside, will be posted on the FedBizOps website at http://www.fedbizopps.gov.
