Added: Apr 10, 2008 12:15 pm
PLEASE PROVIDE DESTINATION PRICING AND DELIVERY INFORMATION FOR THE FOLLOWING CORE MATERIAL TO BE DELIVERED TO THE FOLLOWING LOCATIONS WITHIN 30 DARO
2 EA TO FT LEWIS, WA 98433
6 EA TO NEW CUMBERLAND, PA 17070
NSN: 5680-01-084-3900, CORE MATERIAL, CELLULAR, STRUCTURAL: Shall be in accordance with SAE-AMS-C-81986 dated July 1, 1998 with the following characteristics:
Material - Nylon
Non-perforated, expanded cell
Cell size - 3/16 inches
Cell thickness - 2 inches
Ribbon thickness - .002 inches
Density - 2.0 pounds per cubic foot
Ribbon direction dimension - 48 inches
Transverse direction dimension - 96 inches
Fully cured
Unit of issue - SH (sheet)
PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this Item Purchase Description, conform to the producer's own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.
PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. In the event a pallet or skid is used for shipping, the following notice shall apply:
Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.
MARKING: Shipments to GSA and other civilian agencies shall be marked in accordance with FED-STD-123. Shipments to the Department of Defense (DOD) shall be marked in accordance with MIL-STD-129.
2 EA TO FT LEWIS, WA 98433
6 EA TO NEW CUMBERLAND, PA 17070
NSN: 5680-01-122-8726, CORE MATERIAL, CELLULAR, STRUCTURAL: Shall be in accordance with SAE AMS-C-81986, Core Material, Plastic honeycomb, Nylon Paper Base, for Aircraft Structural Applications , with the following characteristics:
Material - Nylon
Non-perforated, expanded cell
Cell size - 1/8 inch
Cell thickness - 7 inches
Density - 3.0 pounds per cubic foot
Ribbon direction dimension - 44 inches
Transverse direction dimension - 96 inches
Fully cured
Application for copies of SAE Aerospace Material Specifications should be addressed to SAE, 400 Commonwealth Drive, Warrendale, PA 15096.
UNIT OF ISSUE EA (each)
PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this Item Purchase Description, conform to the producer's own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.
PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. In the event a pallet or skid is used for shipping, the following notice shall apply:
Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.
MARKING: Shipments to GSA and other civilian agencies shall be marked in accordance with FED-STD-123. Shipments to the Department of Defense (DOD) shall be marked in accordance with MIL-STD-129.
