Added: Apr 16, 2008 11:22 am
This is a Request for Information (RFI) only. This RFI shall not be construed as a formal solicitation or an obligation on the part of the government to acquire any product or services. It does not guarantee a subsequent solicitation will be issued. Submission of any information in response to this RFI is completely voluntary, and costs associated with any submission shall not be reimbursed by the Government. The information requested will be used by the Air Force District of Washington, Acquisition Division AFDW/A7K to facilitate decision making.
Description
DOD has a requirement to develop TTPs/Weapons Effects to find, fix, track and engage high speed moving targets (JOUNS/COMCENTCOM/ACC), unmanned tactical and medium altitude UAVs (JOUNS/CENTCOM/EUCOM/PACOM) and surface craft (PACOM/NORTHCOM) using unmanned target systems to simulate high speed moving target in the air, land and sea.
Unmanned Ground Target (UGT) requirements: CLIN 0001
The contractor shall provide 3 types of UGTs that meets the following minimum characteristics:
•1) UGT 1
•a. Optionally remote (ground target can still be manually driven)
•b. Capable of operating in conditions similar to conditions in the operational theater. (dirt roads, rough terrain)
•c. Remote Start, shift, steer, brake accelerate, and camera.
•d. Built in emergency shutdown procedures
•e. Down linkable video transmitter
•f. Capable of operations between 60 and 70 mph (terrain permitting)
•2) UGT 2
•a. Optionally remote (ground target can still be manually driven)
•b. Capable of operating in conditions similar to conditions in the operational theater. (dirt roads, rough terrain)
•c. Remote Start, shift, steer, brake accelerate, and camera.
•d. Built in emergency shutdown procedures
•e. Down linkable video
•f. Capable of operations between 60 and 70 mph (terrain permitting)
•g. With GPS coordinate
•h. Updates video data to include speed and location
•3) UGT 3
•a. Optionally remote (ground target can still be manually driven)
•b. Capable of operating in conditions similar to conditions in the operational theater. (dirt roads, rough terrain)
•c. Remote Start, shift, steer, brake accelerate, and camera.
•d. Built in emergency shutdown procedures
•e. Down linkable video
•f. Capable of operations between 60 and 70 mph (terrain permitting)
•g. With GPS coordinate
•h. Updates video data to include speed and location
•i. OPTIONS: include color, make, model, year, 4 wheel drive
Unmanned Aerial Target (UAT) requirements: CLIN 0002
The contractor shall provide UATs that meets the following minimum characteristics. Three versions will be available to include low, medium, and high altitude targets/trainers:
•1) UAT 1 Low Altitude Rotor wing
•a. Fully Autonomous
•b. Gimbaled and Stabilized resolution (480 TV Lines)
•c. Color Camera
•d. 10x optical zoom
•e. Optional gimbaled and stabilized IR camera
•f. Speeds range from 0-60 mph
•g. Range up to 30 miles
•h. Auto Hover, take off and auto precision landing
•i. ROVER compatible
•j. Capable of roof landing
•k. 60 min flight time
•2) UAT 2 Low Altitude Fixed wing
•a. Fully Autonomous
•b. Gimbaled and Stabilized resolution (480 TV Lines)
•c. Color Camera
•d. 10x optical zoom
•e. Optional gimbaled and stabilized IR camera
•f. Speeds range from 0-60 mph
•g. Range up to 30 miles
•h. ROVER compatible
•i. 60 min flight time
•3) UAT 3 Medium altitude Fixed wing
•a. Fully Autonomous
•b. Gimbaled and Stabilized resolution (480 TV Lines)
•c. Color Camera
•d. 10x optical zoom
•e. Optional gimbaled and stabilized IR camera
•f. Speeds range from 0-60 mph
•g. Range up to 30 miles
•h. ROVER compatible
•i. 120 min flight time
•4) UAT 4 High altitude Fixed wing
•a. Fully Autonomous
•b. Gimbaled and Stabilized resolution (480 TV Lines)
•c. Color Camera
•d. 10x optical zoom
•e. Optional gimbaled and stabilized IR camera
•f. Speeds range from 0-60 mph
•g. Range up to 30 miles
•h. ROVER compatible
•i. 240 min flight time
Unmanned Surface Target (UST) requirements: CLIN 0003
The contractor shall provide USTs that meets the following minimum characteristics:
1) Optionally remote (surface target can still be manually driven)
2) Capable of operating in conditions similar to conditions in the operational theater. (Water and sea state)
3) Remote Start, drive, steer, accelerate, and camera.
4) Built in emergency shutdown procedures
5) Down linkable video
Ground Control Station (GCS) CLIN 0004
The contractor shall supply operators and ground control systems for UGTs, UATs, USTs. Each unit requires a GCS to operate. GCS may be moved to different locations and used for multiple targets. Each GCS shall meet the following minimum characteristics:
•1) UGT GCS
•a. UGT GCS comes with numerous components that can be purchased separately
• i. Video Receiver
•1. Multi band hand held Viewer
•2. Single band Integrated system
• ii. Control transmitter
• iii. Repeater system (receiver/transmitter)
•2) UAT GCS
•a. UGT GCS comes with numerous components that can be purchased separately
• i. Video Receiver
• ii. Control transmitter
•3) UST GSC
•a. UGT GCS comes with numerous components that can be purchased separately
• i. Video Receiver
• ii. Control transmitter
• iii. Repeater system (receiver/transmitter)
• iv. Airborne GCS using a fixed/rotor wing aircraft
Training and Operations Support CLIN 0005
The contractor shall training for operators and ground control systems for the following equipment;
•1) UGT GCS
•a. Four hours of operator/training per unit included with the price (travel and per diem will be charged at current rate)
•b. Transportation of targets will be at government expense
•c. Ground Control Station sold separately. Price based on customer's requirements (terrain, distance, controls)
•2) UAT
•a. Training parts kit and ground control station included
•3) UST
•a. Comes with four hours of operator/training per unit included with the price(travel and per diem will be charged at current rate)
•b. Transportation of targets will be at Government expense
Ground Control Station sold separately. Price based on customer's requirements (terrain, distance, controls)
Travel and Transport CLIN 006
The contractor shall have the ability to Travel to operational locations to provide training/operations;
•4) Travel
•a. In accordance with FAR 31.205-46 travel costs to be reimbursed at rates not to exceed the maximum locality per diem rates (the combination of lodging, meals and incidentals) in effect at the time of travel, as set forth in the Federal Travel Regulations, Joint Travel Regulation and Standard Regulations, Section 925, as applicable. All air travel must be booked on American-flagged carriers, unless otherwise directed by the Contracting Officer. UGT GCS comes with numerous components that can be purchased separately
•5) Transportation of Equipment
•a. Due to the multiple areas of delivery and equipment transportation will be IAW local rates
Request for Information responses shall be submitted in 3-ring binders on 8x11-inch paper, double-spaced. Except for reproduced sections of the solicitation document, text shall be no smaller than 12 point. Tables and figures may be single spaced. Margins on all four sides of each sheet will be at least one inch. All pages shall be printed on one side only. Special consideration will not be given for colors, pictures or unnecessary graphics. Audio and Video recordings, or any other electronic media (ie: CD, tape) will not be accepted. Capabilities shall be submitted as follows: (a) Interested parties shall submit one (1) original response to the RFI, satisfying each part of this requirement, not exceeding 30 pages. (b) Responses shall be mailed to the attention of Kamesha Walker and Charlotte Rose, AFDW/A7KH, 2822 Doherty Drive SW, Bldg 94, Suite 310, Naval Station Anacostia Annex, Washington DC 20373. No electronic responses shall be accepted.
All questions or clarification requests shall be submitted by email to Kamesha Walker, Kamesha.Walker.ctr@afncr.af.mil or Charlotte.Rose@bolling.af.mil and shall be received no later than 12:00pm, EST on 6 May 2008. Responses to questions received after that date/time may not be addressed.
