Opportunity History
- Original Synopsis
Jun 20, 2008 7:00 pm
|
Solicitation Number:
W9124Q-SANDELEV
Notice Type:
Combined Synopsis/Solicitation
Synopsis:
Added: Jun 20, 2008 12:05 pm
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. We have a requirement for a sand elevator to be used to assist in blowing sand test of Army material. The sand elevator shall have a carbon steel frame, with forklift channels for the purpose of moving the sand elevator. It shall be powered by a variable frequency drive, minimum 5 hp, 208, 3 phase, 20:1 constant torque motor, or equivalent, with safety switch disconnect, and includes all controls necessary to operate system. The sand elevator shall be capable of elevating sand with a density of 120 lb/ft3, at a maximum flow rate of 3 tons/hour and minimum flow rate of 300lbs/hour. It shall have discharge height not to exceed 15 feet above ground level. It must be able hold a minimum of 1,000lbs of sand at a bulk density of 120/lbs/ft and be powder coated as to resist corrosion and rust from the elements. The hopper shall not exceed a total height of 40 from the ground in order to gain easy accessibility. A carbon steel double helix removable, for wear replacement, screw shall be included, as well as, a 5:1 in-line speed reducer, or equivalent, is required to move the sand. The applicable NAICS code is 333922 with at size standard of 500 employees. Payment will be made by DFAS; therefore, you must be registered in the Central Contractor Registration (http://www.ccr.gov/), as well as, Wide Area Work Flow (https://wawf.eb.mil/). Award shall be made to the technically acceptable, low price proposal. You shall submit commercially available literature on your unit that demonstrates that all of the above capabilities are met. From the Federal Acquisition Regulation (FAR), the following provisions and clauses are applicable to this solicitation: FAR 211-11 ($3000), FAR 52.212-1, FAR 52.212-3, FAR 52.212-4, FAR 42.212-5, FAR (52.203-6 Alt I, 52.219-14, 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.232.33, 52.232-36). Full text of these clauses may be found at http://www.arnet.gov/far. From the Defense Federal Acquisition Regulation Supplement (DFARS), the following provisions and clauses are applicable to this solicitation: DFARS 252.212-7000, DFARS 252.212-7001 (DFARS 252.225-7007, DFARS 252.225-7012, DFARS 252.247.7024). Full text of these clauses may be found at http://www.arnet.gov/far. Your proposal information and commercial literature shall be submitted electronically to jennifer.brown20@us.army.mil or by facsimile to 575-678-4975 Attn: Jennifer Brown no later than 11:00 am MST 27 June 2008.
Contracting Office Address:
ACA, White Sands Missile Range, Directorate of Contracting, Bldg 143, 2nd Floor, Crozier Street, White Sands Missile Range, NM 88002-5201
Place of Performance:
ACA, White Sands Missile Range Directorate of Contracting, Bldg 143, 2nd Floor, Crozier Street White Sands Missile Range NM
88002-5201
US
|
General Information
Notice Type:
Combined Synopsis/Solicitation
Posted Date:
June 20, 2008
Response Date:
June 27, 2008
Archiving Policy:
Automatic, on specified date
Archive Date:
August 26, 2008
Classification Code:
38 -- Construction, mining, excavating & highway maintenance equipment
NAICS Code:
333 -- Machinery Manufacturing/333922 -- Conveyor and Conveying Equipment Manufacturing
|