Added: Jul 15, 2008 9:04 pm
Material: Approximately 2500 tons of either 1.5 inch or 2 inch minus aggregate shall be delivered and stockpiled at approximately 16.7 miles from Roy, NM at Mills Canyon. (see attached map for exact location). Stockpile area will be staked at the location. The material shall be delivered between July 21, 2008 and August 8, 2008.
Location Description: From Las Vegas, New Mexico travel 39 miles north on I-25 to Wagon Mound, NM. Proceed east for 34 miles on State Highway 120 to Roy, NM. Travel northwest for 10 miles on NM-39 to the junction of County Rd U-1. Turn left on County Rd. U-1 and travel 6.7 miles onto Mills Canyon Rd. and continue to stockpile site.
****Please provide quote for both 1.5 and 2 in minus.****
Provide the gradation, plasticity index (PI), liquid limit (LL), fractured faces and Los Angles abrasion for each aggregate source submitted. More than one aggregate may be submitted for consideration.
Handle and stockpile according to below:
Make the stockpiles neat and regular in shape. Make the side slopes no flatter than 1:1.5.
Build the stockpiles in order to segregate material. Complete each layer before depositing aggregates in the next layer. Do not allow aggregates from the one layer to run down over lower layers of the stockpile. Do not drop aggregates from a bucket or spout in one location to form a cone-shaped pile.
Construct stockpile layers by spreading aggregates with trucks or other approved pneumatic-tired equipment. Do not push aggregates into piles.
When operating trucks on stockpiles, avoid tracking dirt or other deleterious material onto the stockpiled material.
